Safety Warnings
Please pay attention to the following safety warnings:
Contents
Temperature
Operating Temperature
For most PocketWizard radios, the operating temperature range is above -15° C (5° F) and below 50° C (120° F).
The Nikon MiniTT1 operating temperature range is above -12° C (10° F) and below 50° C (120° F).
Low temperature affects coin cell performance. Always use fresh batteries in cold temperatures. See the Batteries section for more information.
Storage Temperature
For all PocketWizard products the storage temperature range without batteries is above -30° C (-22° F) and below 85° C (185° F)
Always remove batteries during storage.
Battery Warnings
WARNING – To avoid battery leakage, follow these guidelines:
Always remove the batteries when the unit is not in use for extended periods of time, or during shipping or long distance travel.
Never mix old and new batteries. Always use a fresh pair of matched batteries.
Always change batteries promptly at the first indication of low battery operation.
Do not use or leave the unit in extreme temperature or humid environments.
See the Batteries section for more information.
Special PowerMC2 USB Warning
When connecting the PowerMC2 to the PocketWizard Utility, make sure to disconnect the PowerMC2 from any attached flash first.
Do not connect the PowerMC2 to USB while also connected to the Einstein E640 flash. Damage to your PowerMC2, Einstein, or Computer's USB port could result.
Other Warnings
Do not remove instrument covers during operation.
Do not operate the device in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
There are no user serviceable parts inside PocketWizard products. Do not install substitute parts or perform any unauthorized modification of the instrument. Refer servicing only to qualified and authorized personnel.
Red LED’s are used for dim light application and do not indicate a hazardous status.
PocketWizard products are accessory devices for cameras and flashes. Do not use these products in a manner not specified in documentation.
