Canon Rebel T5i

From PocketWizard Wiki
Revision as of 11:03, 5 March 2014 by Steve (Talk | contribs) (Created page with "Review this page for information about the Canon Rebel T5i and its performance with PocketWizard radios. {{NotSupported}} {{CanonOperational}} <br /> {{CanonSpecialNotes}}...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Review this page for information about the Canon Rebel T5i and its performance with PocketWizard radios.

This camera is not yet supported for use with ControlTL radios with advanced features like HSS/FP-Sync, HyperSync, or TTL. This camera can be used with Basic Trigger Mode.

Consider following us on Facebook, where we always post the latest information about firmware updates and new products: http://www.facebook.com/pocketwizards

General Canon Operational Considerations

The following operational considerations apply to all Canon cameras unless otherwise noted.

Calibration Shot

With a Canon camera and ControlTL radios the first exposure after initial connection or power-on is the calibration shot. It is recommended that you take the calibration shot at 1/125. This initiates communication between the camera and radio. This shot will not fire remote flashes.

Manually Select Camera Model

For best results with a Canon camera and ControlTL radios, be sure to manually select your camera model on the transmitting radio. Camera model selection is found on the "Channel" tab.


Canon Special Notes

The following special notes apply to all Canon cameras.

In-Camera Speedlite Control

Speedlite controls set via the in-camera menus, like Flash Exposure Compensation and ratio settings, are not currently supported.

Rear-Curtain Sync and Bulb

Rear Curtain Sync and Bulb mode cannot be used together. For more information, visit our Rear Curtain Sync page.

Remote Infrared Control

ControlTL radios disable ALL infra-red/optical communication pulses used in Canon’s native TTL system, and will not trigger remote flashes configured to receive these pulses. A PocketWizard radio is required for each remote flash you want to trigger.

Unsupported Flash Modes

FEB (Flash Exposure Bracketing) and Stroboscopic Flash are not currently supported.


Do you need personalized customer service?
If you need more information or personalized assistance, please contact us via our Inquiries Page.