Difference between revisions of "Safety Warnings"

From PocketWizard Wiki
Jump to: navigation, search
(Created page with "Please pay attention to the following safety warnings: == Temperature == === Operating Temperature === For most PocketWizard radios, the operating temperature range is above -15...")
 
Line 14: Line 14:
 
'''Always remove batteries during storage.'''
 
'''Always remove batteries during storage.'''
  
== Other Warnings ==
+
== Battery Warnings ==
  
Do not remove instrument covers during operation.
+
WARNING – To avoid battery leakage, follow these guidelines:
  
Do not operate the device in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
+
Always remove the batteries when the unit is not in use for extended periods of time, or during shipping or long distance travel.
  
There are no user serviceable parts inside PocketWizard products. Do not install substitute parts or perform any unauthorized modification of the instrument. Refer servicing only to qualified and authorized personnel.
+
Never mix old and new batteries. Always use a fresh pair of matched batteries.
  
Red LED’s are used for dim light application and do not indicate a hazardous status.
+
Always change batteries promptly at the first indication of low battery operation.
  
PocketWizard products are accessory devices for cameras and flashes.  Do not use these products in a manner not specified in documentation.
+
Do not use or leave the unit in extreme temperature or humid environments.
  
  
WARNING – To avoid battery leakage, follow these guidelines:
+
== Other Warnings ==
  
• Always remove the batteries when the unit is not in use for extended periods of time, or during shipping or long distance travel.
+
Do not remove instrument covers during operation.
  
• Never mix old and new batteries. Always use a fresh pair of matched batteries.
+
Do not operate the device in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
  
• Always change batteries promptly at the first indication of low battery operation.
+
There are no user serviceable parts inside PocketWizard products. Do not install substitute parts or perform any unauthorized modification of the instrument. Refer servicing only to qualified and authorized personnel.
  
Do not use or leave the unit in extreme temperature or humid environments.
+
Red LED’s are used for dim light application and do not indicate a hazardous status.
 +
 
 +
PocketWizard products are accessory devices for cameras and flashes.  Do not use these products in a manner not specified in documentation.

Revision as of 11:42, 9 December 2010

Please pay attention to the following safety warnings:

Temperature

Operating Temperature

For most PocketWizard radios, the operating temperature range is above -15° C (5° F) and below 50° C (120° F).

The Nikon MiniTT1 operating temperature range is above -12° C (10° F) and below 50° C (120° F).

Low temperature affects coin cell performance. Always use fresh batteries in cold temperatures. See the Batteries section for more information.

Storage Temperature

For all PocketWizard products,the storage temperature range, without batteries is above -30° C (-22° F) and below 85° C (185° F)

Always remove batteries during storage.

Battery Warnings

WARNING – To avoid battery leakage, follow these guidelines:

Always remove the batteries when the unit is not in use for extended periods of time, or during shipping or long distance travel.

Never mix old and new batteries. Always use a fresh pair of matched batteries.

Always change batteries promptly at the first indication of low battery operation.

Do not use or leave the unit in extreme temperature or humid environments.


Other Warnings

Do not remove instrument covers during operation.

Do not operate the device in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.

There are no user serviceable parts inside PocketWizard products. Do not install substitute parts or perform any unauthorized modification of the instrument. Refer servicing only to qualified and authorized personnel.

Red LED’s are used for dim light application and do not indicate a hazardous status.

PocketWizard products are accessory devices for cameras and flashes. Do not use these products in a manner not specified in documentation.