Difference between revisions of "Getting Started"
From PocketWizard Wiki
(→2. Check for Updates) |
|||
| Line 36: | Line 36: | ||
# Connect your radio to your computer via a Mini-B USB cable | # Connect your radio to your computer via a Mini-B USB cable | ||
# The connected radio will be displayed in the top left of the Utility window. | # The connected radio will be displayed in the top left of the Utility window. | ||
| − | # Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps | + | # Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps 5 to 9 and proceed to the next radio. |
| − | # Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio. | + | # Under the Update Tab, click "Check for Updates", which will download the latest firmware version, and prompt to update the firmware in the connected radio. |
| − | # The | + | # The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible. |
| − | # After the | + | # After the Utility confirms a successful firmware update, disconnect the radio from your computer. |
# Perform a Factory Reset of your radio, by holding TEST as you power on the radio for 10 seconds, until you see 4 green blinks in a row. [http://www.pocketwizard.com/inspirations/tutorials/reset_mode/ Click here to view a video of this reset process] | # Perform a Factory Reset of your radio, by holding TEST as you power on the radio for 10 seconds, until you see 4 green blinks in a row. [http://www.pocketwizard.com/inspirations/tutorials/reset_mode/ Click here to view a video of this reset process] | ||
# Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | # Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | ||
| Line 53: | Line 53: | ||
# Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio. | # Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio. | ||
# Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio. | # Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio. | ||
| − | # The | + | # The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible. |
| − | # After the | + | # After the Utility confirms a successful firmware update, disconnect the radio from your computer, and move the power switch off. |
# Perform a Factory Reset of your radio, by holding the TEST button as you power on the radio. | # Perform a Factory Reset of your radio, by holding the TEST button as you power on the radio. | ||
# Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | # Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | ||
| Line 71: | Line 71: | ||
# Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio. | # Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio. | ||
# Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio. | # Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio. | ||
| − | # The | + | # The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible. |
| − | # After the | + | # After the Utility confirms a successful firmware update, disconnect the radio from your computer, and move the power switch off. |
# Perform a Factory Reset of your radio, by holding the C key as you power on the radio. | # Perform a Factory Reset of your radio, by holding the C key as you power on the radio. | ||
# Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | # Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below. | ||
| Line 119: | Line 119: | ||
<br> | <br> | ||
<br> | <br> | ||
| + | |||
====3. First Time Setup==== | ====3. First Time Setup==== | ||
<br> | <br> | ||
Revision as of 07:54, 2 September 2014
1. Download the PocketWizard Utility
Windows
- Download the PocketWizard Utility Version 1.58 Installer for Windows
- Save the installer to the directory of your choice (usually the Downloads folder)
- Run the Installer and follow the installation instructions
- The PocketWizard Utility is now installed in your Start Menu
Mac
- Download the appropriate PocketWizard Utility for your Mac:
- Save the Disk Image file (.dmg) to the directory of your choice (usually the Downloads folder)
- Open the downloaded .dmg file
- Run the PocketWizard installer package within the Disk Image, and follow the installation prompts
- The PocketWizard Utility is now installed in your Applications folder.
2. Check for Updates
MiniTT1, FlexTT5, PowerST4, and PowerMC2
- Launch the PocketWizard Utility
- Connect your radio to your computer via a Mini-B USB cable
- The connected radio will be displayed in the top left of the Utility window.
- Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps 5 to 9 and proceed to the next radio.
- Under the Update Tab, click "Check for Updates", which will download the latest firmware version, and prompt to update the firmware in the connected radio.
- The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible.
- After the Utility confirms a successful firmware update, disconnect the radio from your computer.
- Perform a Factory Reset of your radio, by holding TEST as you power on the radio for 10 seconds, until you see 4 green blinks in a row. Click here to view a video of this reset process
- Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below.
Plus III
- Launch the PocketWizard Utility
- Connect your radio to your computer via a Mini-B USB cable
- The connected radio will be displayed in the top left of the Utility window.
- Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio.
- Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio.
- The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible.
- After the Utility confirms a successful firmware update, disconnect the radio from your computer, and move the power switch off.
- Perform a Factory Reset of your radio, by holding the TEST button as you power on the radio.
- Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below.
MultiMAX
- Launch the PocketWizard Utility
- Enable USB Mode on the MultiMAX:
- Turn off the MultiMAX
- Hold the Backlight button (between TEST and MENU), and connect the Mini-B USB cable to your computer
- Continue to hold the Backlight button, and move the power switch to Transmit
- Release the Backlight button
- The connected radio will be displayed in the top left of the Utility window.
- Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio.
- Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio.
- The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible.
- After the Utility confirms a successful firmware update, disconnect the radio from your computer, and move the power switch off.
- Perform a Factory Reset of your radio, by holding the C key as you power on the radio.
- Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed below.
Current Firmware Versions
| Radio | Firmware Version | Release Date | Release Notes |
|---|---|---|---|
| MiniTT1 / FlexTT5 Canon | 6.700 | 2014-08-05 | Release Notes |
| MiniTT1 / FlexTT5 Nikon | 3.700 | 2014-08-05 | Release Notes |
| PowerMC2 | 2.400 | 2013-06-11 | Release Notes |
| PowerST4 | 5.400 | 2013-06-11 | Release Notes |
| Plus III | 1.200 | 2013-06-11 | Release Notes |
| MultiMAX | 7.53 | See Manual | |
When available, information about Beta firmware is available here. There are currently no beta firmware releases.
3. First Time Setup
MiniTT1 & FlexTT5 - Canon
- For the radio that will be used as the transmitter attached to your camera, change the Camera Model setting to match the camera the radio will be attached to for Configuration C1. This setting is located under the Misc tab when your radio is connected to the PocketWizard Utility. Make sure to Apply Changes in the bottom left of the Utility window after applying this setting. Once the radio has briefly disappeared and reappeared in the Utility window (which confirms the settings have been applied to the radio), you can disconnect the USB cable.
- Connect your receiving flashes to their respective FlexTT5's. Turn the flash on, and set it to the normal ETTL mode - NOT "Master" or "Slave" mode. Then, turn the FlexTT5 on to Configuration C1. Within a few seconds, a low power flash will be emitted from the directly-connected flash, confirming the flash and FlexTT5 are communicating through the hotshoe properly.
- Connect the transmitting MiniTT1 or FlexTT5 to your camera. Turn the radio on to Configuration C1.
- Turn on the camera, and set to 1/160th shutter speed. Take a test shot with the camera at this shutter speed - the remote flash will not fire (this is a Calibration Shot for the radio). Take a second test shot, and your remote flashes will fire a TTL exposure!
Step 1 is only required once, or when the camera model changes. The normal power-up sequence is Steps 2-4.
These steps are for basic TTL operation. Using an AC3? Continue Here Using a Master Canon flash? Continue Here
MiniTT1 & FlexTT5 - Nikon
- Set your camera to use Auto-FP. On most Nikon Cameras, this is Custom Function e1, located under the Pencil menu. This setting should be set to the slowest shutter speed with the "(Auto FP)" option. Most Nikon cameras will use "1/250 (Auto FP)", although some will be 1/200 (Auto FP)".
- Connect your receiving flashes to their respective FlexTT5's. Turn the flash on, and set it to the normal TTL mode - NOT "Master" or "Slave" mode. Then, turn the FlexTT5 on to Configuration C1. Within a few seconds, a low power flash will be emitted from the directly-connected flash, confirming the flash and FlexTT5 are communicating through the hotshoe properly.
- Connect the transmitting MiniTT1 or FlexTT5 to your camera. Turn the radio on to Configuration C1.
- Turn on the camera, and set to 1/160th shutter speed. Take a test shot with the camera at this shutter speed - the remote flash will fire, but may not sync properly (this is a Calibration Shot for the radio). Take a second test shot, and your remote flashes will fire a TTL exposure!
Step 1 is only required once, or when you set up a new camera. The normal power-up sequence is Steps 2-4.
These steps are for basic TTL operation. Using an AC3? Continue Here Using a Master Nikon flash? Continue Here
PowerST4
- Connect your PowerST4 to your remote Elinchrom Flash, and power on the flash unit. The radio will power on when the flash is turned on.
- Follow the above instructions for starting up a Canon or Nikon transmitting radio.
- You will now be triggering your PowerST4! Use the in-camera Flash Exposure Compensation settings to adjust the power levels.
You can also use your AC3 or Canon / Nikon master flash controls to adjust the manual power level of the connected flash. See the respective links above.
PowerMC2
- Connect your PowerMC2 to your remote Einstein flash, and power on the flash unit. The radio will power on when the flash is turned on.
- Use the Einstein's LCD to change the Channel and Zone settings to channel: "CTL-01" and "Zone A"
- Follow the above instructions for starting up a Canon or Nikon transmitting radio.
- You will now be triggering your PowerMC2! Use the in-camera Flash Exposure Compensation settings to adjust the power levels.
You can also use your AC3 or Canon / Nikon master flash controls to adjust the manual power level of the connected flash. See the respective links above.
Plus III & MultiMAX
- With all equipment powered off, connect your remote radio to the camera or flash you'd like to trigger (with appropriate cable)
- Connect your transmitting radio to the hotshoe of your camera (or for a remote camera, simply have the radio in your hand)
- Power on the remote radio, the remote flash, and the transmitting radio.
- Ensure the Plus III's are set to TxRx mode, or for a MultiMAX that the transmitting radio is set to Transmit, and the receiver to Receive mode.
- Set the Channels and Zones to match.
- Take a test shot, or press the TEST button, and the remote unit will fire!
4. Further Reading
For more information about specific topics, continue reading here:
And for more radio-specific information, start here:
