Difference between revisions of "Template:CanonQuick"

From PocketWizard Wiki
Jump to: navigation, search
Line 1: Line 1:
# Put '''fresh batteries''' in everything
+
# Turn everything '''off''' and install '''fresh batteries'''
 
# '''Set up''' your remotes:  
 
# '''Set up''' your remotes:  
 
## Slide your Speedlite onto a FlexTT5 and '''lock it''' down
 
## Slide your Speedlite onto a FlexTT5 and '''lock it''' down
## Turn the Speedlite on, and set it to '''ETTL'''.  Don't use "Master" or "Slave"
+
## Turn the Speedlite on, and set it to '''ETTL''' - don't use "Master" or "Slave"
## Turn the FlexTT5 on to '''C.1'''.  A low power flash confirms it's ready
+
## Turn the FlexTT5 on to '''C.1''' - a low power flash confirms it's ready
# Slide your MiniTT1 or FlexTT5 onto your camera.  Turn it on to '''C.1'''
+
# Slide your MiniTT1 or FlexTT5 onto your camera and turn it on to '''C.1'''
# Turn on the camera, set the shutter speed to '''1/160th''', and shoot a '''calibration shot''' (the Speedlites won't fire)
+
# Turn on the camera, set the shutter speed to '''1/160th''', and shoot a '''calibration shot''' - the Speedlites won't fire
 
# '''Start shooting''' TTL pictures!
 
# '''Start shooting''' TTL pictures!
  
Line 14: Line 14:
 
* [[Advanced Wireless TTL|A Canon Master Speedlite]]
 
* [[Advanced Wireless TTL|A Canon Master Speedlite]]
  
[[MiniTT1 and FlexTT5|Learn more about your MiniTT1 or FlexTT5]].
+
[[MiniTT1 and FlexTT5|Learn more about your MiniTT1 or FlexTT5]]

Revision as of 13:44, 6 October 2014

  1. Turn everything off and install fresh batteries
  2. Set up your remotes:
    1. Slide your Speedlite onto a FlexTT5 and lock it down
    2. Turn the Speedlite on, and set it to ETTL - don't use "Master" or "Slave"
    3. Turn the FlexTT5 on to C.1 - a low power flash confirms it's ready
  3. Slide your MiniTT1 or FlexTT5 onto your camera and turn it on to C.1
  4. Turn on the camera, set the shutter speed to 1/160th, and shoot a calibration shot - the Speedlites won't fire
  5. Start shooting TTL pictures!

You're all set!

This is Basic Wireless TTL. Adjust camera FEC to change the power level of your Speedlite. You can't adjust power levels using the camera's [Flash control] menu settings, but there are easier options:

Learn more about your MiniTT1 or FlexTT5