Difference between revisions of "PowerMC2"
(→Using your PowerMC2)
|Line 54:||Line 54:|
===== [[ControlTL]] =====
===== [[ControlTL]] =====
Revision as of 13:57, 19 March 2014
We have identified a potentially hazardous issue with the PocketWizard® PowerMC2 receiver, designed for use with the Paul C. Buff Einstein™ flash units, especially the CE/433 MHz version.
If the PowerMC2’s antenna cover is broken, removed, or in any way damaged, DISCONTINUE USE IMMEDIATELY and contact PocketWizard®. In rare circumstances, exposed metal components on the PowerMC2 can become electrified, posing a very serious shock hazard.
Customers in the United States may continue to safely use the Einstein and PowerMC2 with the power cord supplied by the manufacturer and a properly wired three-pronged outlet or with the Vagabond battery pack. All other customers are advised to contact us immediately for assistance in replacing a broken, removed or damaged antenna cover. If a U.S.-style three-pronged outlet is unavailable in your location, ALWAYS UNPLUG THE FLASH PRIOR TO HANDLING THE POWERMC2.
We are working to correct the issue. We greatly apologize for this inconvenience.
If you have any questions or concerns please contact PocketWizard Technical Support at +1 802-735-1079 or via our inquiry page.
Receiver with ControlTL® for Einstein™ E640 Flash
The PowerMC2 Receiver Module enables remote power control of Einstein™ E640 flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerMC2 plugged into your Einstein™ E640 flash, you can now adjust the flash power settings directly from the camera position. Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard’s unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting.
When connecting the PowerMC2 to the PocketWizard Utility, make sure to disconnect the PowerMC2 from any attached flash first.
Do not connect the PowerMC2 to USB while also connected to the Einstein E640 flash. Damage to your PowerMC2, Einstein, or Computer's USB port could result.
Using your PowerMC2
1. Connect the PowerMC2 to your Einstein™ E640 Flash via the remote port, then power on the flash.
2. Select the Channel and Zone A, B, or C via the E640’s LCD.
3. Set up your PocketWizard transmitter and take pictures normally.
4. Adjust the camera’s Flash Exposure Compensation (FEC) to adjust the power of your remote flash. See the Basic Power Control section for more information about FEC.
Make sure all your radios are set to the same PocketWizard channel.
The Status LED blinks Green every few seconds to indicate normal operation. It will blink Red in sync with a trigger.
Momentarily pressing TEST will test trigger the flash.
Your PowerMC2 needs to be on the same channel as your transmitter. Channels can be set via the Einstein’s built-in LCD. The PowerMC2 is capable of receiving on either ControlTL Channels for use with ControlTL radios like the MiniTT1 and FlexTT5 or Standard Channels for triggering with the Plus II, MultiMAX, and Sekonic meters.
To set the channel, press the Einstein’s™ FUNCTION button until the Channel selection box is highlighted, and then change channels with the ADJUST buttons. Press the FUNCTION button again to specify a zone. When using ControlTL Channels, or Standard Channels 17-32, you can specify zone A, B, or C.
Note: When receiving on Standard Channels, the PowerMC2 will be unable to do any form of PowerTracking, or remote Manual Power Control. You must be using a ControlTL radio in ControlTL radio mode for the Einstein to be able to engage in any form of ControlTL feature.
Having trouble with your PowerMC2? Check out our PowerMC2 FAQ page!
PocketWizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. ControlTL allows remote TTL systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement.
Manual Power Control
Adjust the manual power settings of your remote Einstein flash directly from a AC3 ZoneController, or master flash mounted on your on-camera MiniTT1 or FlexTT5. You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting through the user interface on the back of the master flash or with the dials of the AC3 ZoneController. Now you can work with total control with your remote lights, without leaving your shooting position.
Our patent pending HyperSync® technology allows photographers to achieve faster X-sync speeds with full power flash. That extra speed can be used to freeze action or cut ambient light - both of which can produce results never possible before. HyperSync works automatically with the PowerMC2. All you need is a MiniTT1 or FlexTT5 on camera to gain the benefits of HyperSync. While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any configuration.
When working with certain manual flashes, you can change any of your settings on your camera and the system adjusts for those settings. Change your camera's exposure compensation to adjust the flash output, or make adjustments in aperture or ISO and the system balances your flash for proper exposure.
With only a MiniTT1 or FlexTT5 on your camera, your camera’s FEC (Flash Exposure Compensation) control will adjust your flash power output level for all your PowerMC2-connected flashes as shown in the table below.
- or -
AC3 Power Dial in Manual
|Einstein E640 Power Output|
|+2.7||1/2 + 0.6|
|+2.3||1/2 + 0.3|
|+1.7||1/4 + 0.6|
|+1.3||1/4 + 0.3|
|+0.7||1/8 + 0.6|
|+0.3||1/8 + 0.6|
|-0.3||1/16 + 0.6|
|-0.7||1/16 + 0.3|
|-1.3||1/32 + 0.6|
|-1.7||1/32 + 0.3|
|-2.3||1/64 + 0.6|
|-2.7||1/64 + 0.3|
|Frequency||340.00 - 354.00 US FCC/IC |
433.42 - 434.42 MHz - CE
|Channels||52 Channels over 26 Frequencies - US FCC/IC |
35 Channels over 5 Frequencies - CE
|Antenna||2.7" (6.9 cm) rubberized|
|Mounting||Eight-pin remote socket|
|Zone Select Switch||A-B-C Plus channel "D" if receiving on a MultiMAX channel.|
|Status Indicator||LED: Green, Amber, Red Status indications|
|USB||USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground|
DO NOT CONNECT RADIO TO USB WHILE ALSO CONNECTED TO EINSTEIN FLASH.
|Operating Temperature||Above -15° C (5° F) and below 50° C (120° F)|
|Storage Temperature||Above -30° C (22° F) and below 85° C (185° F)|
|Construction||high impact plastic, rubberized antenna, RoHS Compliant|
|Power||Receives power from attached flash|
|Dimensions||4.66" (11.84 cm) long x 1.29" (3.27 cm) wide x .43" (1.09 cm) depth|
|Weight||.77 ounces (21.83 grams)|
|Requirements||Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability.|
May be paired with any PocketWizard transmitter or transceiver for simple triggering.