Plus III FAQ

From PocketWizard Wiki
Revision as of 11:51, 20 March 2014 by Steve (Talk | contribs)

Jump to: navigation, search

Do you have a question about your Plus III? Check out these Frequently Asked Questions, compiled by PocketWizard tech support.


Is the Plus III compatible with my camera/flash?

Virtually all cameras and flashes with a standard size hot-shoe, PC socket, or sync port are compatible with Standard Channel radios like the Plus II, Plus III, PlusX, and MultiMAX.


Can the Plus III do TTL? HSS/FP?

No. The Plus III is a Standard Channel trigger. If you need TTL, HSS/FP, or power control, you’re looking for our ControlTL radios like the MiniTT1 and FlexTT5.


The Plus III won’t trigger my studio flash! How can I get the Plus III to trigger my flash?

There seem to be some packs that are wired backwards from the industry standard, which can cause this problem. Try the following:

  • On packs that use a household-style sync plug, simply reversing the way the plug is oriented usually solves the issue.
  • Some customers have seen success using a Wein Safe Sync.
  • We also have a cable solution that allows you to reverse the orientation of the sync cables, and trigger your lights. First, plug the phono to miniphone adapter that came with your Plus III into the sync port on the pack itself. Then, plug an M3H cable into the adapter in the pack, and then an MH3 into the M3H. If it does not work, simply flip the MH3 around and use it orientated the other direction.


Sometimes when I turn my Plus III on nothing happens! Is there a fix?

Yes! Update your Plus III to the latest firmware version. Connect your radio to the PocketWizard Utility and navigate to the "Update Tab." Click the “Check for Updates Button.”


What cable do I need?

You can use the Cable Finder at PocketWizard.com to find the right cable for lots of different cameras and flashes.

Contact PocketWizard tech support if you still have questions.


I need my Plus III to stay powered on for a long time. What can I do?

Consider powering your Plus III via USB with a PW-AC-USB Adapter.


What is the two-stage TEST button all about? How does remote half-press work?

Half-pressing a transmitting Plus III, either via a camera shutter release or the two-stage TEST button, will cause certain receiving PocketWizard radios to pre-release a remote camera. This wakes the camera up and engages Auto-Focus, preparing it to respond quickly to full-press triggers.

You can read more about this on our Plus III Half-Press Compatibility page.


How can I increase my range?

Check out our Long Range Performance page for tips.

For extreme long distances, consider using the Plus III’s Repeater feature, described on the Plus III wiki page.


Why isn’t my remote camera catching the flash in frame?

If you are attempting to trigger a remote camera in sync with remote flashes, be sure to set the flashes’ receivers to 1 Channel higher than the remote camera’s receiver. This is called Relay Mode.


Is the Plus III compatible with other PocketWizard radios?

Yes! The Plus III is compatible with all PocketWizard transmitters and receivers of the same frequency (FCC or CE), including PocketWizard-enabled photo gear from Profoto, Dynalite, Norman, Photogenic and Sekonic light meters.