Panasonic

Note: This page is currently under construction and information is being added daily. If you cannot find the information you are looking for, please contact our technical support team here.

Congratulations on your purchase of the PocketWizard FlexTT5® Wireless Photo Control System for Panasonic! You can use the FlexTT5 Transceiver to control single or multiple off-camera electronic or intelligent TTL flashes. The PocketWizard ControlTL® System takes the complex TTL data being sent through the camera’s hot shoe and digitally interprets and transmits it as a reliable radio signal. You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The FlexTT5 is compatible with any PocketWizard radio for triggering a manual flash.

Read Me

PocketWizard Utility

Your new PocketWizard radio runs on very sophisticated software we call ControlTL™ which can be configured to your specific needs using the PocketWizard Utility. You can download the PocketWizard Utility on our Getting Started page.

Note: At this moment the PocketWizard Utility is not compatible with our FlexTT5 for Panasonic. We will be releasing a new version of the Utility prior to the first firmware release for this product.

Product Registration

ControlTL software is designed to be “Future Proof” and will be upgraded from time to time. Please register your product online to be notified when updates are available. Visit our Registration page.

Getting Started

USB Connector (behind antenna)

Adjustable antenna

Zone Selector

Configuration/Channel 1

Configuration/Channel 2

Power Off

TEST Button

Remote studio or other

flash triggering port

Remote Camera Triggering Port

Status LED

Lanyard Loop

Battery Compartment

(2AA [IEC:LR6])

1/4-20 mount

(on bottom)

Panasonic

Hot Shoe with

Pass Through

Locking Ring

(on bottom foot)

The PocketWizard FlexTT5 for Panasonic

• All equipment should be turned OFF when connecting.
• Power on the FlexTT5 and then the camera and/or speedlight.
• If operation is erratic, check batteries first. We recommend using high capacity rechargeable batteries in your Speedlight(s).
• Use the latest firmware for your camera and review all camera and flash manuals.
• You need a FlexTT5 for each remote Speedlight.
• Set all radios to the same channel.
• Take first shot at 1/125 so system can properly calibrate timing. (First shot will not be correctly exposed.
• For most basic functions, operation is identical Panasonic's wireless system.