Difference between revisions of "Nikon D300"
|(4 intermediate revisions by 3 users not shown)|
|Line 9:||Line 9:|
For best results, use the latest camera body firmware. The latest firmware for the D300 is
For best results, use the latest camera body firmware. The latest firmware for the D300 is available for download at [https://..com//Nikon ].
Latest revision as of 09:37, 25 August 2021
Review this page for information about the Nikon D300 and its performance with PocketWizard radios.
- 1 General Nikon Operational Considerations
- 2 D300 Specific Operational Considerations
- 3 HyperSync Performance
- 4 Nikon Special Notes
General Nikon Operational Considerations
The following operational considerations apply to all Nikon cameras unless otherwise noted.
Flash Sync Speed - Custom Camera Setting
When using a Nikon camera and ControlTL radios, the camera's "Flash Sync Speed" setting must be set to the slower shutter speed of the two "Auto FP" options. This setting can be found in the "Bracketing/Flash" Custom Settings menu.
D300 Specific Operational Considerations
The following operational considerations apply only to the D300.
For best results, use the latest camera body firmware. The latest firmware for the D300 is available for download at Nikon Download Center.
Nikon Special Notes
The following special notes apply to all Nikon cameras.
FV Lock is not currently supported with PocketWizard radios.
- Mirror Up mode is not fully supported at this time – test with your specific configuration before using.
- Exposure Delay mode (set via in-camera menu) is not currently supported.
- Repeater/RPT mode is not currently supported.
In-Camera Flash Control
Using in-camera “Flash Control for Built In Flash” menu to control remote zones is not currently supported.
Rear-Curtain Sync and Bulb
Rear Curtain Sync and Bulb mode cannot be used together. For more information, visit our Rear Curtain Sync page.
Remote Infrared Control
ControlTL radios disable ALL infra-red/optical communication pulses used in Nikon’s native i-TTL system, and will not trigger remote flashes configured to receive these pulses. A PocketWizard radio is required for each remote flash you want to trigger.
|Do you need personalized customer service?|
|If you need more information or personalized assistance, please contact us via our Inquiries Page.|