Difference between revisions of "MiniTT1 and FlexTT5 Specifications"
From PocketWizard Wiki
| Line 2: | Line 2: | ||
See [[Channels]] for more information about Standard and ControlTL frequencies and channels. | See [[Channels]] for more information about Standard and ControlTL frequencies and channels. | ||
| + | ====Specifications==== | ||
| − | '''TTL Compatibility''' | + | {| border="1" |
| − | + | |- | |
| − | Nikon i-TTL | + | |'''TTL Compatibility''' |
| − | + | |Nikon i-TTL <br>Canon E-TTL II | |
| − | Canon E-TTL II | + | |- |
| − | + | |'''Frequency''' | |
| − | + | |340.00 - 354.00 US FCC/IC <br>433.42 - 434.42 MHz - CE | |
| − | '''Frequency''' | + | |- |
| − | + | |'''Channels''' | |
| − | 340.00 - 354.00 | + | |52 Channels over 26 Frequencies - US FCC/IC <br> 35 Channels over 5 Frequencies - CE |
| − | + | |- | |
| − | 433.42 - 434.42 MHz CE | + | |'''Antenna''' |
| − | + | |FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing <br> MiniTT1 - internal | |
| − | + | |- | |
| − | '''Channels''' | + | |'''Transmit Output Power''' |
| − | + | |Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) | |
| − | 52 Channels over 26 Frequencies | + | |- |
| − | + | |'''Range Performance''' | |
| − | 35 Channels over 5 Frequencies | + | |Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. <br> Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. |
| − | + | |- | |
| − | + | |'''Mounting''' | |
| − | '''Antenna''' | + | |Hot Shoe, 1/4-20, lanyard, velcro |
| − | + | |- | |
| − | FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing | + | |'''Maximum Shooting Rate''' |
| − | + | |TTL Mode: within 1 FPS of camera's maximum frames per second (FPS) <br>Basic Trigger Mode: Camera Max FPS <br>dependent on flash power settings | |
| − | MiniTT1 - internal | + | |- |
| − | + | |'''Power/Channel Switch''' | |
| − | + | |OFF - C.2 - C.1 | |
| − | '''Transmit | + | |- |
| − | + | |'''Zone Select Switch''' | |
| − | Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) | + | |A-B-C (matches Canon/Nikon zones) |
| − | + | |- | |
| − | + | |'''Status Indicator''' | |
| − | '''Range Performance''' | + | |LED: Green, Amber, Red status indications |
| − | + | |- | |
| − | Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. | + | |'''Power''' |
| − | + | |Receives power from attached flash | |
| − | Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. | + | |- |
| − | + | |'''Camera / P1 Port ''' | |
| − | + | |1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous <br>Tip = Trigger <br>Ring = Pre-Trigger <br>Sleeve = Ground | |
| − | '''Mounting''' | + | |- |
| − | + | |'''Flash / P2 Port ''' | |
| − | Hot Shoe, 1/4-20, lanyard, velcro | + | |1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
| − | + | |- | |
| − | + | |'''Minimum Receive Contact Time''' | |
| − | '''Maximum Shooting Rate''' | + | |Camera / P1 Port = 80 milliseconds <br>Flash / P2 Port = 500us |
| − | + | |- | |
| − | TTL Mode: | + | |'''Voltage Present''' |
| − | + | |3.3 VDC (all pins) - safe for all cameras | |
| − | Basic Trigger Mode: Camera Max FPS | + | |- |
| − | + | |'''Voltage protection''' | |
| − | dependent on flash power settings | + | |Hot Shoe - Up to 50V <br>P2 Port - Up to 200V |
| − | + | |- | |
| − | + | |'''Operating Temperature''' | |
| − | '''Power / Channel Switch''' | + | |Above -15° C (5° F) and below 50° C (120° F). |
| − | + | |- | |
| − | OFF - C.2 - C.1 | + | |'''Storage Temperature (without battery)''' |
| − | + | |Above -30 C (-22 F) and below 85 C (185 F) | |
| − | + | |- | |
| − | '''Zone Select Switch''' | + | |'''Construction''' |
| − | + | |High impact plastic, captive battery door <br>Hot Shoe made of glass reinforced resin <br>ROHS Compliant | |
| − | A-B-C (matches Canon/Nikon zones) | + | |- |
| − | + | |'''Power''' | |
| − | + | |MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type <br>FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB | |
| − | '''Status Indicator''' | + | |- |
| − | + | |'''Battery Life''' | |
| − | LED: Green, Amber, Red status indications | + | |MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits <br>FlexTT5 - 60 + Hours |
| − | + | |- | |
| − | + | |'''Dimensions''' | |
| − | '''Camera / P1 Port''' | + | |MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery <br>FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
| − | + | |- | |
| − | 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. | + | |'''Weight''' |
| − | + | |MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery <br>FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries | |
| − | Tip = Trigger | + | |- |
| − | + | |'''Included in the box ''' | |
| − | Ring = Pre-Trigger | + | |MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide <br>FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide |
| − | + | |} | |
| − | Sleeve = Ground | + | |
| − | + | ||
| − | + | ||
| − | '''Flash / P2 Port''' | + | |
| − | + | ||
| − | 1/8" (3.5 mm) mono miniphone. | + | |
| − | + | ||
| − | + | ||
| − | '''Minimum Receive Contact Time''' | + | |
| − | + | ||
| − | Camera / P1 Port = 80 milliseconds | + | |
| − | + | ||
| − | Flash / P2 Port = 500us | + | |
| − | + | ||
| − | + | ||
| − | '''Voltage Present''' | + | |
| − | + | ||
| − | 3.3 VDC (all pins) - safe for all cameras | + | |
| − | + | ||
| − | + | ||
| − | '''Voltage protection''' | + | |
| − | + | ||
| − | Hot Shoe - Up to 50V | + | |
| − | + | ||
| − | P2 Port - Up to 200V | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | '''Operating Temperature''' | + | |
| − | + | ||
| − | Above -15° C (5° F) and below 50° C (120° F). | + | |
| − | + | ||
| − | + | ||
| − | '''Storage Temperature (without battery)''' | + | |
| − | + | ||
| − | Above -30 C (-22 F) and below 85 C (185 F) | + | |
| − | + | ||
| − | + | ||
| − | '''Construction''' | + | |
| − | + | ||
| − | High impact plastic, captive battery door | + | |
| − | + | ||
| − | Hot Shoe made of glass reinforced resin | + | |
| − | + | ||
| − | + | ||
| − | '''Power''' | + | |
| − | + | ||
| − | MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type | + | |
| − | + | ||
| − | FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB | + | |
| − | + | ||
| − | + | ||
| − | '''Battery Life''' | + | |
| − | + | ||
| − | MiniTT1 - | + | |
| − | + | ||
| − | FlexTT5 - 60 + Hours | + | |
| − | + | ||
| − | + | ||
| − | '''Dimensions''' | + | |
| − | + | ||
| − | MiniTT1 - 2. | + | |
| − | + | ||
| − | FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered | + | |
| − | + | ||
| − | + | ||
| − | '''Weight''' | + | |
| − | + | ||
| − | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery | + | |
| − | + | ||
| − | FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries | + | |
| − | + | ||
| − | + | ||
| − | '''Included in the box''' | + | |
| − | + | ||
| − | MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide | + | |
| − | + | ||
| − | FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide | + | |
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 06:34, 30 August 2011
| Next recommended reading: FCC Notice |
See Channels for more information about Standard and ControlTL frequencies and channels.
Specifications
| TTL Compatibility | Nikon i-TTL Canon E-TTL II |
| Frequency | 340.00 - 354.00 US FCC/IC 433.42 - 434.42 MHz - CE |
| Channels | 52 Channels over 26 Frequencies - US FCC/IC 35 Channels over 5 Frequencies - CE |
| Antenna | FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing MiniTT1 - internal |
| Transmit Output Power | Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
| Range Performance | Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. |
| Mounting | Hot Shoe, 1/4-20, lanyard, velcro |
| Maximum Shooting Rate | TTL Mode: within 1 FPS of camera's maximum frames per second (FPS) Basic Trigger Mode: Camera Max FPS dependent on flash power settings |
| Power/Channel Switch | OFF - C.2 - C.1 |
| Zone Select Switch | A-B-C (matches Canon/Nikon zones) |
| Status Indicator | LED: Green, Amber, Red status indications |
| Power | Receives power from attached flash |
| Camera / P1 Port | 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous Tip = Trigger Ring = Pre-Trigger Sleeve = Ground |
| Flash / P2 Port | 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
| Minimum Receive Contact Time | Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us |
| Voltage Present | 3.3 VDC (all pins) - safe for all cameras |
| Voltage protection | Hot Shoe - Up to 50V P2 Port - Up to 200V |
| Operating Temperature | Above -15° C (5° F) and below 50° C (120° F). |
| Storage Temperature (without battery) | Above -30 C (-22 F) and below 85 C (185 F) |
| Construction | High impact plastic, captive battery door Hot Shoe made of glass reinforced resin ROHS Compliant |
| Power | MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB |
| Battery Life | MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits FlexTT5 - 60 + Hours |
| Dimensions | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
| Weight | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries |
| Included in the box | MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide |
