Difference between revisions of "MiniTT1 and FlexTT5 Specifications"
| Line 2: | Line 2: | ||
| − | '''TTL Compatibility | + | '''TTL Compatibility''' |
Nikon i-TTL | Nikon i-TTL | ||
| Line 9: | Line 9: | ||
| − | '''Frequency | + | '''Frequency''' |
340.00 - 354.00 MHz US FCC / IC | 340.00 - 354.00 MHz US FCC / IC | ||
| Line 16: | Line 16: | ||
| − | '''Channels | + | '''Channels''' |
52 Channels over 26 Frequencies (FCC/IC) | 52 Channels over 26 Frequencies (FCC/IC) | ||
| Line 23: | Line 23: | ||
| − | '''Antenna | + | '''Antenna''' |
FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing | FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing | ||
| Line 35: | Line 35: | ||
| − | '''Range Performance | + | '''Range Performance''' |
Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. | Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. | ||
| Line 42: | Line 42: | ||
| − | '''Mounting | + | '''Mounting''' |
Hot Shoe, 1/4-20, lanyard, velcro | Hot Shoe, 1/4-20, lanyard, velcro | ||
| Line 99: | Line 99: | ||
| − | '''Voltage protection | + | '''Voltage protection''' |
Hot Shoe - Up to 50V | Hot Shoe - Up to 50V | ||
| Line 106: | Line 106: | ||
| − | '''USB | + | '''USB''' |
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground | USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground | ||
Revision as of 11:29, 29 August 2011
See Channels for more information about Standard and ControlTL frequencies and channels.
TTL Compatibility
Nikon i-TTL
Canon E-TTL II
Frequency
340.00 - 354.00 MHz US FCC / IC
433.42 - 434.42 MHz CE
Channels
52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)
Antenna
FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing
MiniTT1 - internal
Transmit output power:
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance
Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
Mounting
Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate
TTL Mode: within 1 FPS of camera's maximum frames per second (FPS)
Basic Trigger Mode: Camera Max FPS
dependent on flash power settings
Power / Channel Switch
OFF - C.2 - C.1
Zone Select Switch
A-B-C (matches Canon/Nikon zones)
Status Indicator
LED: Green, Amber, Red status indications
Camera / P1 Port
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present
3.3 VDC (all pins) - safe for all cameras
Voltage protection
Hot Shoe - Up to 50V
P2 Port - Up to 200V
USB
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature
Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature (without battery)
Above -30 C (-22 F) and below 85 C (185 F)
Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power
MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life
MiniTT1 - 60 + Hours
FlexTT5 - 60 + Hours
Dimensions
MiniTT1 - 2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall
FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight
MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery
FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box
MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide
FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
ROHS Compliant
