Difference between revisions of "MiniTT1 and FlexTT5"

From PocketWizard Wiki
Jump to: navigation, search
(Created page with "Congratulations on your purchase of the PocketWizard MiniTT1™ / FlexTT5™ System for Nikon DSLR i-TTL / CLS cameras and flashes. Nikon owners can use the MiniTT1 Transmitter a...")
 
(37 intermediate revisions by 8 users not shown)
Line 1: Line 1:
Congratulations on your purchase of the PocketWizard MiniTT1™ / FlexTT5™ System for Nikon DSLR i-TTL / CLS cameras and flashes. Nikon owners can use the MiniTT1 Transmitter and FlexTT5 Transceiver to control single or multiple off-camera Nikon i-TTL / CLS flashes. The PocketWizard ControlTL™ System takes the complex i-TTL data being sent through the camera’s hot shoe and digitally interprets and transmits it as a reliable radio signal. You can now place i-TTL (or manual) flash units anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 and FlexTT5 are compatible with any PocketWizard for triggering manual flash or remote cameras.  
+
[[File:FlexTT5+MiniTT1.jpg|right|400px|PocketWizard Canon MiniTT1 and FlexTT5/FlexTT6]]Congratulations on your purchase of the PocketWizard MiniTT1® / FlexTT5/FlexTT6® Wireless Photo Control System for Canon or Nikon DSLR cameras and flashes. You can use the MiniTT1 Transmitter and FlexTT5 / FlexTT6 Transceiver to control single or multiple off-camera electronic or intelligent TTL flashes. The PocketWizard ControlTL® System takes the complex TTL data being sent through the camera’s hot shoe and digitally interprets and transmits it as a reliable radio signal. You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 and FlexTT5 / FlexTT6 are compatible with any PocketWizard radio for triggering manual flash or remote cameras.  
  
== Key Features ==
 
  
=== [[ControlTL]] ===
 
  
PocketWizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system.  ControlTL allows remote i-TTL for Nikon CLS systems as well as Manual Power Control.  ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement.  
+
The Canon-specific MiniTT1 and FlexTT5 / FlexTT6 radios work within the Canon E-TTL II system.
  
 +
The Nikon-specific MiniTT1 and FlexTT5 radios work within the Nikon i-TTL / CLS system.
  
=== Dedicated CLS / i-TTL Triggering ===
+
All references to TTL are exclusively for the electronic or intelligent TTL systems specific to Canon (E-TTL II) and Nikon (i-TTL / CLS), and not film TTL.
  
Locking your MiniTT1 Transmitter into the hot shoe of a Nikon DSLR camera, and mounting CLS / i-TTL flashes onto FlexTT5 Transceivers gives you full flash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up.  Use the camera’s flash exposure controls for basic control of remote flashes, or add an [[AC3 ZoneController]] or Nikon Master unit for even more flexibility.
+
The terms Speedlite or Speedlight are used interchangeably throughout this wiki.
  
  
=== Manual Power Control ===
 
  
Adjust the manual power settings of your remote Nikon Speedlights directly from a AC3 ZoneController, SB-800 or SB-900 flash mounted on your on-camera MiniTT1 or FlexTT5You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply through the user interface on the back of the SB-800 or SB-900 or with the dials of the AC3 ZoneController.  Now you can work with total control with your remote lights, without leaving your shooting position.  Nikon SU-800 Wireless Speedlight Commander may also be used.
+
This wiki contains the latest information about the operation of your radiosIf you would like to download a PDF of this information, [[PocketWizard_Wiki:Books/MiniTT1_and_FlexTT5_Manual|click here]] and follow the instructions.
  
 +
{| class ="wikitable" style="background-color: #ffffcc;"
 +
|'''Note:''' The FlexTT6 was created to make the newest generation of Canon cameras (such as the 1DX Mark II and 5D Mark IV) compatible with our ControlTL system. The difference between the FlexTT6 and FlexTT5 is a circuit board hardware change. The functions of the radios are identical. Any information or videos you see, with the exception of compatible cameras, is identical between the FlexTT6 and FlexTT5. To use a  FlexTT5 with a FlexTT6, the FlexTT5  will need to be updated to firmware version 6.905 or later to function properly.
 +
|}
  
=== High Speed Sync (Auto FP) === 
+
__NOTOC__
  
When HyperSync can’t keep up, High Speed Sync takes over for Speedlight flash photography all the way to 1/8000.  ControlTL gains faster recycling times and more flashes per set of batteries when shooting in Nikon's FP / HSS Flash mode. Use this feature to shoot wide open in bright sun for amazing results.
+
== Operation ==
  
 +
{{treasure map}}
  
=== [[HyperSync]] ===
+
'''To quickly begin using your radio, you might be interested in the Quick Guides or other documentation at [http://www.pocketwizard.com/support/manual PocketWizard.com].'''
  
Our patent pending HyperSync® technology allows photographers to achieve faster X-sync speeds, up to 1/500th of a second, with full power flash.  That extra speed can be used to freeze action or cut  ambient light - both of which can produce results never possible before. HyperSync works with both TTL speedlights and full size studio flash.  All you need is a MiniTT1 or FlexTT5 on camera that has been tuned to your specific camera and flash via the PocketWizard Utility.  While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any set-up. 
 
  
 +
For more detailed information, use the links below to hone in on the specific feature you are looking for.  The links are the section headings.  For example, the words '''Getting Started''' below will take you straight to that section.
  
=== [[PowerTracking]] ===
 
  
When working with certain manual flashes, you can change any of your settings on your camera and the system adjusts for those changes.  Change your camera's exposure compensation to adjust the flash output, or make adjustments in aperture or ISO and the system balances your flash for proper exposure.
 
  
 +
==== [[Getting Started]] ====
  
 +
Information you should know before using your radios.  Also referred to as "READ ME FIRST" information.
  
=== [[PocketWizard Utility]] ===
 
  
Programmable and Upgradeable: Use the supplied PocketWizard Utility software with the on-board USB port to program the MiniTT1 to any PocketWizard channel and zone as well as many other custom settings.  The MiniTT1 can be upgraded whenever updates and feature enhancements are available.
+
==== [[MiniTT1 and FlexTT5 Key Features|Key Features]]====
  
 +
Learn more about the key features of your MiniTT1 and FlexTT5 / FlexTT6.  Additional information on features can also be found at [http://www.pocketwizard.com/products/transmitter_receiver/ PocketWizard.com]
  
  
 +
==== [[MiniTT1 and FlexTT5 FAQ]] ====
  
== Operation ==
+
Having trouble with your MiniTT1 or FlexTT5/FlexTT6? Check out our [[MiniTT1 and FlexTT5 FAQ]] page!
  
To quickly begin using your radio, you might be interested in the [http://www.pocketwizard.com/upload/photos/819LPF612_v2.1_Nikon_Quick_Guide.pdf Nikon MiniTT1 + FlexTT5 Quick Guide] (downloads a PDF in a new window).
 
  
 +
==== [[Safety Warnings]] ====
  
For more detailed information, use the links below to hone in on the specific feature you are looking for.  The links are the section headings.  For example the words '''Getting Started''' below will take you straight to that section.
+
Information about operating the radios safely can be found here.
  
  
==== [[Getting Started]] ====
+
==== [[Nikon Compatibility]] ====
  
Information you should know before using your radios.  Also referred to as "READ ME FIRST" information.
+
Find out exactly what cameras and flashes work with the Nikon-Specific ControlTL radios, and what specific operational considerations are required for your gear.
  
  
==== [[Safety Warnings]] ====
+
==== [[Canon Compatibility]] ====
  
Information about operating the radios safely can be found here.
+
Find out exactly what cameras and flashes work with the Canon-specific ControlTL radios, and what specific operational considerations are required for your gear.
  
  
Line 71: Line 74:
 
==== [[Basic Wireless TTL]] ====
 
==== [[Basic Wireless TTL]] ====
  
Simple i-TTL operation instructions.  Use all of your Speedlights as one zone of light with the camera making the exposure decision.
+
Simple TTL operation instructions.  Use all of your Speedlites as one zone of light with the camera making the exposure decision.
  
  
Line 91: Line 94:
 
==== [[HyperSync]] ====
 
==== [[HyperSync]] ====
  
Learn more about increasing your X-Sync speed using HyperSync.  Understand the [[differences between HyperSync and High Speed Sync]].
+
Learn more about increasing your X-Sync speed using HyperSync.
  
  
 
==== [[High Speed Sync]] / Auto FP ====
 
==== [[High Speed Sync]] / Auto FP ====
  
Use your Speedlights with your camera's fastest shutter speeds.  Understand the [[differences between HyperSync and High Speed Sync]].
+
Use your Speedlites with your camera's fastest shutter speeds.  See [[Understanding HyperSync and High Speed Sync]].
  
  
Line 104: Line 107:
  
  
==== [[Learn Mode]]  ====
+
==== [[Remote Camera Triggering]] ====
 
+
Learn Mode is not required for normal operation of your radios, but if you are working away from the PocketWizard Utility and in conflict with another photographer on your channel, Learn Mode allows you to change channels in the field.
+
 
+
 
+
==== [[Remote Camera Triggering]] =====
+
  
 
In addition to triggering remote flash, your PocketWizard radios can trigger a remote camera's motor drive port.  Relay Mode is covered in this section.
 
In addition to triggering remote flash, your PocketWizard radios can trigger a remote camera's motor drive port.  Relay Mode is covered in this section.
Line 130: Line 128:
  
 
==== [[Long Range Performance]] ====
 
==== [[Long Range Performance]] ====
 +
 +
Optimize range using these techniques.
 +
 +
 +
==== [[MiniTT1 and FlexTT5 Specifications]] ====
 +
 +
Details on radio specifics are found here.
 +
 +
 +
==== [[FCC Notice]] ====
 +
 +
The FCC wants you to know...

Revision as of 10:47, 14 August 2018

PocketWizard Canon MiniTT1 and FlexTT5/FlexTT6
Congratulations on your purchase of the PocketWizard MiniTT1® / FlexTT5/FlexTT6® Wireless Photo Control System for Canon or Nikon DSLR cameras and flashes. You can use the MiniTT1 Transmitter and FlexTT5 / FlexTT6 Transceiver to control single or multiple off-camera electronic or intelligent TTL flashes. The PocketWizard ControlTL® System takes the complex TTL data being sent through the camera’s hot shoe and digitally interprets and transmits it as a reliable radio signal. You can now place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 and FlexTT5 / FlexTT6 are compatible with any PocketWizard radio for triggering manual flash or remote cameras.


The Canon-specific MiniTT1 and FlexTT5 / FlexTT6 radios work within the Canon E-TTL II system.

The Nikon-specific MiniTT1 and FlexTT5 radios work within the Nikon i-TTL / CLS system.

All references to TTL are exclusively for the electronic or intelligent TTL systems specific to Canon (E-TTL II) and Nikon (i-TTL / CLS), and not film TTL.

The terms Speedlite or Speedlight are used interchangeably throughout this wiki.


This wiki contains the latest information about the operation of your radios. If you would like to download a PDF of this information, click here and follow the instructions.

Note: The FlexTT6 was created to make the newest generation of Canon cameras (such as the 1DX Mark II and 5D Mark IV) compatible with our ControlTL system. The difference between the FlexTT6 and FlexTT5 is a circuit board hardware change. The functions of the radios are identical. Any information or videos you see, with the exception of compatible cameras, is identical between the FlexTT6 and FlexTT5. To use a FlexTT5 with a FlexTT6, the FlexTT5 will need to be updated to firmware version 6.905 or later to function properly.


Operation

Quick Navigation
Getting Started
MiniTT1 and FlexTT5 Key Features
Safety Warnings
Nikon Compatibility
Canon Compatibility
Batteries
PocketWizard Utility
Basic Wireless TTL
Advanced Wireless TTL
Manual Flash
PowerTracking
HyperSync
High Speed Sync
Channels
Learn Mode
Remote Camera Triggering
Factory Reset
Status LED
Mounting
Long Range Performance
MiniTT1 and FlexTT5 Specifications
FCC Notice

To quickly begin using your radio, you might be interested in the Quick Guides or other documentation at PocketWizard.com.


For more detailed information, use the links below to hone in on the specific feature you are looking for. The links are the section headings. For example, the words Getting Started below will take you straight to that section.


Getting Started

Information you should know before using your radios. Also referred to as "READ ME FIRST" information.


Key Features

Learn more about the key features of your MiniTT1 and FlexTT5 / FlexTT6. Additional information on features can also be found at PocketWizard.com


MiniTT1 and FlexTT5 FAQ

Having trouble with your MiniTT1 or FlexTT5/FlexTT6? Check out our MiniTT1 and FlexTT5 FAQ page!


Safety Warnings

Information about operating the radios safely can be found here.


Nikon Compatibility

Find out exactly what cameras and flashes work with the Nikon-Specific ControlTL radios, and what specific operational considerations are required for your gear.


Canon Compatibility

Find out exactly what cameras and flashes work with the Canon-specific ControlTL radios, and what specific operational considerations are required for your gear.


Batteries

Battery types, polarity, and life expectancy information.


PocketWizard Utility

Connect your radios to your computer via USB and control many aspects of them via the PocketWizard Utility.


Basic Wireless TTL

Simple TTL operation instructions. Use all of your Speedlites as one zone of light with the camera making the exposure decision.


Advanced Wireless TTL

Advanced i-TTL operation instructions. Control individual zones of light. Control your remote Speedlights manually from the camera position.


Manual Flash

Trigger any remote flash simply.


PowerTracking

Trigger a compatible remote studio flash and control its power level directly from the camera position.


HyperSync

Learn more about increasing your X-Sync speed using HyperSync.


High Speed Sync / Auto FP

Use your Speedlites with your camera's fastest shutter speeds. See Understanding HyperSync and High Speed Sync.


Channels

Channels allow you to work collaboratively with other photographers, or to work with your radios exclusively.


Remote Camera Triggering

In addition to triggering remote flash, your PocketWizard radios can trigger a remote camera's motor drive port. Relay Mode is covered in this section.


Factory Reset

Sometimes you just need the settings in your radio to be like they were when you first took them out of the box.


Status LED

This section covers the various colors and blink patterns used by the Status LED.


Mounting

Radios perform best when mounted properly.


Long Range Performance

Optimize range using these techniques.


MiniTT1 and FlexTT5 Specifications

Details on radio specifics are found here.


FCC Notice

The FCC wants you to know...