Difference between revisions of "Current Firmware"

From PocketWizard Wiki
Jump to: navigation, search
m
(3 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
Thank you for purchasing a PocketWizard radio! Like most modern electronics, PocketWizard radios run on sophisticated firmware that we update occasionally.
 
Thank you for purchasing a PocketWizard radio! Like most modern electronics, PocketWizard radios run on sophisticated firmware that we update occasionally.
  
If your radios have the latest firmware, you can just start shooting - no updating required!  The radios are already tuned for most situations.
+
If your radios have the latest firmware, you can just start shooting - no updating required!  The radios are set to work for most situations right out of the box.
  
 
Click [Expand] for your radio to see if you can just start taking pictures or if you need to take a moment to update firmware.   
 
Click [Expand] for your radio to see if you can just start taking pictures or if you need to take a moment to update firmware.   
Line 15: Line 15:
 
{{CanonCamerasAutoDetect}}
 
{{CanonCamerasAutoDetect}}
  
If your camera is not listed, or your radio's firmware is older than {{Latestcanon}}, you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
+
If your camera is not listed, or your radio's firmware is older than {{Latestcanon}}, or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
  
  
Line 21: Line 21:
  
 
{{CanonQuick}}
 
{{CanonQuick}}
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''FlexTT6 - Canon'''
 +
<div class="mw-collapsible-content">
 +
 +
{{Latestflextt6}} is the latest Canon FlexTT6 firmware.  If that's what you have, and your camera is listed here, follow the Quick Start steps below:
 +
 +
{{CanonCamerasAutoDetectTT6}}
 +
 +
If your camera is not listed, or your radio's firmware is older than {{Latestflextt6}}, or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
 +
<u>Quick Start:</u>
 +
 +
{{CanonQuickTT6}}
  
 
</div>
 
</div>
Line 30: Line 47:
 
{{Latestnikon}} is the latest Nikon firmware.  If that's what you have, follow the Quick Start steps below.
 
{{Latestnikon}} is the latest Nikon firmware.  If that's what you have, follow the Quick Start steps below.
  
If your radio's firmware is older than {{Latestnikon}}, you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
+
If your radio's firmware is older than {{Latestnikon}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
  
  
Line 36: Line 53:
  
 
{{NikonQuick}}
 
{{NikonQuick}}
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''PowerMC2'''
 +
<div class="mw-collapsible-content">
 +
 +
{{Latestmc2}} is the latest PowerMC2 firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[PowerMC2]] page to learn more about your radio.
 +
 +
If your radio's firmware is older than {{Latestmc2}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''PowerST4'''
 +
<div class="mw-collapsible-content">
 +
 +
{{Latestst4}} is the latest PowerST4 firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[PowerST4]] page to learn more about your radio.
 +
 +
If your radio's firmware is older than {{Latestst4}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''Plus III'''
 +
<div class="mw-collapsible-content">
 +
 +
{{LatestP3}} is the latest Plus III firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[Plus III]] page to learn more about your radio.
 +
 +
If your radio's firmware is older than {{LatestP3}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''Plus IV'''
 +
<div class="mw-collapsible-content">
 +
 +
{{LatestP4}} is the latest Plus IV firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[Plus IV]] page to learn more about your radio.
 +
 +
If your radio's firmware is older than {{LatestP4}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''MultiMAX'''
 +
<div class="mw-collapsible-content">
 +
 +
{{Latestmax}} is the latest MultiMAX firmware for USB-capable MultiMAX radios.  If that's what you have, then you're all set!  Start shooting!  Go to the [[MultiMAX]] page to learn more about your radio.
 +
 +
You can see the firmware version of your MultiMAX by holding down A as you power the radio on.
 +
 +
If your radio's firmware is older than {{Latestmax}} then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
 +
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
'''MultiMAX II'''
 +
<div class="mw-collapsible-content">
 +
 +
{{LatestMM2}} is the latest MultiMAX II firmware.  If that's what you have, then you're all set!  Start shooting!
 +
 +
You can see the firmware version of your MultiMAX II by holding down A as you power the radio on.
 +
 +
If your radio's firmware is older than {{LatestmMM2}} then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.
  
 
</div>
 
</div>
 
</div>
 
</div>

Revision as of 14:13, 18 July 2017

Thank you for purchasing a PocketWizard radio! Like most modern electronics, PocketWizard radios run on sophisticated firmware that we update occasionally.

If your radios have the latest firmware, you can just start shooting - no updating required! The radios are set to work for most situations right out of the box.

Click [Expand] for your radio to see if you can just start taking pictures or if you need to take a moment to update firmware.


MiniTT1 & FlexTT5 - Canon

6.905 is the latest Canon firmware. If that's what you have, and your camera is listed here, follow the Quick Start steps below:

If your camera is not listed, or your radio's firmware is older than 6.905, or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.


Quick Start:

  1. Turn everything off and install fresh batteries
  2. Set up your remotes:
    1. Slide your Speedlite onto a FlexTT5 and lock it down
    2. Turn the Speedlite on, and set it to ETTL - don't use "Master" or "Slave"
    3. Turn the FlexTT5 on to C.1 - a low power flash confirms it's ready
  3. Slide your MiniTT1 or FlexTT5 onto your camera and turn it on to C.1
  4. Turn on the camera, set the shutter speed to 1/160th, and shoot a calibration shot to prime the radios - the remote Speedlite won't fire
  5. Start shooting TTL pictures!

You're all set!

This is Basic Wireless TTL. Adjust your camera's Flash Exposure Compensation to change the power level of your Speedlite. You can't adjust power levels using the camera's [Flash control] menu settings, but there are easier and more powerful options:

Next recommended reading: MiniTT1 and FlexTT5

FlexTT6 - Canon

7.003 is the latest Canon FlexTT6 firmware. If that's what you have, and your camera is listed here, follow the Quick Start steps below:

If your camera is not listed, or your radio's firmware is older than 7.003, or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.


Quick Start:

  1. Turn everything off and install fresh batteries
  2. Set up your remotes:
    1. Slide your remote Speedlite onto a FlexTT5 or FlexTT6 and lock it down
    2. Turn the Speedlite on, and set it to ETTL - don't use "Master" or "Slave"
    3. Turn the FlexTT5/6 on to C.1 - a low power flash confirms it's ready
  3. Slide your FlexTT6 onto your camera and turn it on to C.1
  4. Turn on the camera, set the shutter speed to 1/160th, and shoot a calibration shot to prime the radios - the remote Speedlite won't fire
  5. Start shooting TTL pictures!

You're all set!

This is Basic Wireless TTL. Adjust your camera's Flash Exposure Compensation to change the power level of your Speedlite. You can't adjust power levels using the camera's [Flash control] menu settings, but there are easier and more powerful options:

Next recommended reading: MiniTT1 and FlexTT5

MiniTT1 & FlexTT5 - Nikon

3.909 is the latest Nikon firmware. If that's what you have, follow the Quick Start steps below.

If your radio's firmware is older than 3.909 or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.


Quick Start:

  1. Turn everything off and install fresh batteries
  2. Set up your remotes:
    1. Slide your Speedlight onto a FlexTT5 and lock it down
    2. Turn the Speedlight on, and set it to TTL (don't use "Master" or "Remote") and Standard Illumination pattern
    3. Turn the FlexTT5 on to C.1 - a low power flash confirms it's ready
  3. Slide your MiniTT1 or FlexTT5 onto your camera and turn it on to C.1
  4. Turn on the camera, and set Custom Setting "e1 Flash Sync Speed" to either "1/250 s (AutoFP)" or "1/200 s (AutoFP)", whichever is lowest for your camera - set it and forget it! Not all Nikon models support Auto FP, so if your camera doesn't have this setting, skip this setting
  5. Set the shutter speed to 1/160th, and shoot a calibration shot to prime the radios
  6. Start shooting TTL pictures!

You're all set!

This is Basic Wireless TTL. Adjust your camera's Flash Exposure Compensation to change the power level of your Speedlight or explore these powerful options:

Next recommended reading: MiniTT1 and FlexTT5

PowerMC2

2.402/3 (FCC/CE) is the latest PowerMC2 firmware. If that's what you have, then you're all set! Start shooting! Go to the PowerMC2 page to learn more about your radio.

If your radio's firmware is older than 2.402/3 (FCC/CE) or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.

PowerST4

5.400 is the latest PowerST4 firmware. If that's what you have, then you're all set! Start shooting! Go to the PowerST4 page to learn more about your radio.

If your radio's firmware is older than 5.400 or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.

Plus III

1.212 is the latest Plus III firmware. If that's what you have, then you're all set! Start shooting! Go to the Plus III page to learn more about your radio.

If your radio's firmware is older than 1.212 or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.

Plus IV

1.500 is the latest Plus IV firmware. If that's what you have, then you're all set! Start shooting! Go to the Plus IV page to learn more about your radio.

If your radio's firmware is older than 1.500 or you're not sure what your firmware version is then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.

MultiMAX

7.53 is the latest MultiMAX firmware for USB-capable MultiMAX radios. If that's what you have, then you're all set! Start shooting! Go to the MultiMAX page to learn more about your radio.

You can see the firmware version of your MultiMAX by holding down A as you power the radio on.

If your radio's firmware is older than 7.53 then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.

MultiMAX II

8.117 is the latest MultiMAX II firmware. If that's what you have, then you're all set! Start shooting!

You can see the firmware version of your MultiMAX II by holding down A as you power the radio on.

If your radio's firmware is older than Template:LatestmMM2 then you need to install the PocketWizard Utility. Go to our Getting Started page right now. It's easy and should only take a few minutes.