Difference between revisions of "Canon 5D Mark II"

From PocketWizard Wiki
Jump to: navigation, search
(HyperSync Performance)
(AlienBees and FlexTT5 with AC9 Adapter)
Line 62: Line 62:
  
 
{{Don't see your gear?}}
 
{{Don't see your gear?}}
 +
 +
<br />
 +
 +
{{CustomerService}}

Revision as of 09:52, 17 June 2013

Review this page for information about the Canon 5D Mark II and its performance with PocketWizard radios.


General Canon Operational Considerations

The following operational considerations apply to all Canon cameras unless otherwise noted.

Calibration Shot

With a Canon camera and ControlTL radios the first exposure after initial connection or power-on is the calibration shot. It is recommended that you take the calibration shot at 1/125. This initiates communication between the camera and radio. This shot will not fire remote flashes.

Manually Select Camera Model

For best results with a Canon camera and ControlTL radios, be sure to manually select your camera model on the transmitting radio. Camera model selection is found on the "Channel" tab.


HyperSync Performance

Use the grid below to view the 5D Mark II's HyperSync performance with a specific flash.

  1. Find the table for your flash brand and PocketWizard receiver.
  2. Locate your flash in the "Flash Model" column.
  3. Follow the "Transmitter Setup" link in the "Radio Setup" column to configure your transmitter.
  4. Follow the appropriate Receiver Setup link in the "Radio Setup" column. When configuring your receiver, you will need to choose a HyperSync Automation method, either Reduced Clipping or Highest Energy.
  5. Choose the PDF that corresponds to the HyperSync Automation method that you have selected for your radios. The PDFs contain images that illustrate the kind of performance you should expect with your setup.


Einstein and PowerMC2

Flash Model Radio Configuration HyperSync Automation Selection
Einstein 640 Configuring HyperSync Highest Energy PDF Reduced Clipping PDF

Elinchrom and PowerST4

Flash Model Radio Configuration HyperSync Automation Selection
Ranger RX S-Head Configuring HyperSync Highest Energy PDF Reduced Clipping PDF
Ranger RX A-Head Configuring HyperSync Highest Energy PDF Reduced Clipping PDF

AlienBees and FlexTT5 with AC9 Adapter

Flash Model Radio Configuration HyperSync Automation Selection
AlienBees B1600 Configuring HyperSync Highest Energy PDF Reduced Clipping PDF


Don't see your gear?
We have paused our HyperSync testing and PDF production for the time being. We may be adding more results to the wiki as they become available. Check back in the future.


Do you need personalized customer service?
If you need more information or personalized assistance, please contact us via our Inquiries Page.