Difference between revisions of "Beta Firmware"

From PocketWizard Wiki
Jump to: navigation, search
Line 1: Line 1:
Try out the latest [[MiniTT1 and FlexTT5]] firmware (other radios, too!).  We appreciate your help testing our newest features and improvements before our official production release is available.  Anyone can participate, but you should be very comfortable using the [[PocketWizard Utility]] and be willing to provide [http://www.pocketwizard.com/contact/inquiry/ detailed feedback] of your experiences.  If that’s you, please follow the steps below to begin your own beta test.
+
Try out the latest [[MiniTT1 and FlexTT5]] firmware (other radios, too!).  We appreciate your help testing our newest features and improvements before our official production release is available.  Anyone can participate, but you should be very comfortable using the [[PocketWizard Utility]] and be willing to provide [[Beta_Firmware#Feedback_Guidelines|detailed feedback]] of your experiences.  If that’s you, please read on to begin your own beta test.
  
  
Line 80: Line 80:
 
*PocketWizard radios in use
 
*PocketWizard radios in use
 
   
 
   
The following information would also be useful:
+
The following information would also be helpful:
 
*Camera settings
 
*Camera settings
 
*Flash settings
 
*Flash settings
Line 89: Line 89:
 
*Best way to contact you should follow-up be necessary
 
*Best way to contact you should follow-up be necessary
 
   
 
   
Feedback should be sent in via our [http://www.pocketwizard.com/contact/inquiry/ Inquires page] or by email to [mailto:betalab@pocketwizard.com betalab@pocketwizard.com] - please put "beta" in the subject line.
+
Please send feedback via one of these:
 +
*[http://www.pocketwizard.com/contact/inquiry/ PocketWizard.com Inquires Page]  
 +
*[mailto:betalab@pocketwizard.com betalab@pocketwizard.com] - please put "beta" in the subject line.

Revision as of 14:11, 15 January 2015

Try out the latest MiniTT1 and FlexTT5 firmware (other radios, too!). We appreciate your help testing our newest features and improvements before our official production release is available. Anyone can participate, but you should be very comfortable using the PocketWizard Utility and be willing to provide detailed feedback of your experiences. If that’s you, please read on to begin your own beta test.


Current Firmware

Release notes for current official production firmware can be found on our Getting Started page.


You must be using PocketWizard Utility version 1.54 or later before installing the latest firmware.


Canon MiniTT1 & FlexTT5

7D Mark II - beta

The current Canon ControlTL beta firmware version is 6.804 and is available through the PocketWizard Utility right now. It adds support for Canon's latest DSLR, the Canon EOS 7D Mark II, and corrects a few issues.

Release notes: File:Canon MiniTT1 FlexTT5 BETA firmware v6.726.pdf

Official

The current ControlTL Canon official production firmware is 6.905. This release is available for both FCC and CE radios.


Nikon MiniTT1 & FlexTT5

D750 / SB-500 - beta

You should install the latest camera firmware, C:1.01, in your Nikon D750 before continuing - (USA | EU)

The current Nikon ControlTL beta firmware version is 3.909 and is available through the PocketWizard Utility right now. It adds support for Nikon's latest DSLR, the Nikon D750, as well as the SB-500 Speedlight. It also corrects a few issues.

Release Notes: File:Nikon MiniTT1 FlexTT5 BETA firmware v3.707.pdf


Official

The current ControlTL Nikon official production firmware is 3.909. This release is available for both FCC and CE radios.


PowerST4 for Elinchrom

The current PowerST4 firmware is version 5.400. This release is available for both FCC and CE radios. There is no beta release at this time.


PowerMC2 for Einstein E640

The current PowerMC2 firmware is version 2.402/3 (FCC/CE). There is no beta release at this time.


Plus III

The current Plus III firmware is version 1.212. This release is available for both FCC and CE radios. There is no beta release at this time.


MultiMAX

The current MultiMAX firmware is version 7.53. This release is available for both FCC and CE radios. There is no beta release at this time.

Only MultiMAX's with a USB port are capable of downloading firmware. Some older MultiMAX units do not have a USB port.


Enabling Beta Firmware

How to enable the beta firmware options.
  1. To enable access to beta firmware, open the PocketWizard Utility, and navigate down to the blue gear in the bottom left corner of the window.
  2. Navigate over to the "Firmware Updates" tab.
  3. Navigate down to the bottom and check "Yes, I would like to have access to Optional and Beta Test firmware."
  4. Click OK.
  5. Navigate to the Update Tab.
  6. Click "Check for Updates."


How to enable the beta firmware options.

Navigate down to where it says "Optional Versions" and then select the option that matches your connected radio. Click OK and then follow the onscreen prompts that follow.

Feedback Guidelines

We need feedback on your experiences testing the beta firmware! Feedback can include your opinion of overall functionality or any bugs or issues you may have encountered. When providing feedback, the more detail you can provide the better.

Please include the following as a minimum:

  • Beta firmware release version number
  • Camera being used (brand, model # & firmware version)
  • Flashes being used(brand & model #)
  • PocketWizard radios in use

The following information would also be helpful:

  • Camera settings
  • Flash settings
  • Location information (indoor, outdoor)
  • Any potential radio interference sources
  • Anything else that may help us understand your photo environment and situation.
  • Computer system info
  • Best way to contact you should follow-up be necessary

Please send feedback via one of these: