MiniTT1 and FlexTT5 Specifications

From PocketWizard Wiki
Revision as of 11:06, 29 August 2011 by Zachary (Talk | contribs)

Jump to: navigation, search
Next recommended reading: FCC Notice

See Channels for more information about Standard and ControlTL frequencies and channels.


TTL Compatibility

Nikon i-TTL

Canon E-TTL II


Frequency

340.00 - 354.00 MHz US FCC / IC

433.42 - 434.42 MHz CE


Channels

52 Channels over 26 Frequencies (FCC/IC)

35 Channels over 5 Frequencies (CE)


Antenna

FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing

MiniTT1 - internal


Transmit output power:

Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)


Range Performance

Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables.

Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.


Mounting

Hot Shoe, 1/4-20, lanyard, velcro


Maximum Shooting Rate

TTL Mode: within 1 FPS of camera's maximum frames per second (FPS)

Basic Trigger Mode: Camera Max FPS

dependent on flash power settings


Power / Channel Switch

OFF - C.2 - C.1


Zone Select Switch

A-B-C (matches Canon/Nikon zones)


Status Indicator

LED: Green, Amber, Red status indications


Camera / P1 Port

1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous

Tip = Trigger

Ring = Pre-Trigger

Sleeve = Ground


Flash / P2 Port

1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized


Minimum Receive Contact Time

Camera / P1 Port = 80 milliseconds

Flash / P2 Port = 500us


Voltage Present

3.3 VDC (all pins) - safe for all cameras


Voltage protection

Hot Shoe - Up to 50V

P2 Port - Up to 200V


USB

USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground


Operating Temperature

Above -15° C (5° F) and below 50° C (120° F).


Storage Temperature (without battery)

Above -30 C (-22 F) and below 85 C (185 F)


Construction

High impact plastic, captive battery door

Hot Shoe made of glass reinforced resin


Power

MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type

FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB


Battery Life

MiniTT1 - 60 + Hours

FlexTT5 - 60 + Hours


Dimensions

MiniTT1 - 2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall

FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered


Weight

MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery

FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries


Included in the box

MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide

FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide


ROHS Compliant