Nikon D610

From PocketWizard Wiki
Revision as of 11:11, 5 March 2014 by Steve (Talk | contribs) (Created page with "Review this page for information about the Nikon D610 and its performance with PocketWizard radios. {{NotSupported}} {{NikonOperational}} <br /> {{NikonSpecialNotes}} <br ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Review this page for information about the Nikon D610 and its performance with PocketWizard radios. This camera is not yet supported for use with ControlTL radios with advanced features like HSS/FP-Sync, HyperSync, or TTL. This camera can be used with Basic Trigger Mode.

Consider following us on Facebook, where we always post the latest information about firmware updates and new products: http://www.facebook.com/pocketwizards

General Nikon Operational Considerations

The following operational considerations apply to all Nikon cameras unless otherwise noted.

Flash Sync Speed - Custom Camera Setting

When using a Nikon camera and ControlTL radios, the camera's "Flash Sync Speed" setting must be set to the slower shutter speed of the two "Auto FP" options. This setting can be found in the "Bracketing/Flash" Custom Settings menu.


Nikon Special Notes

The following special notes apply to all Nikon cameras.

FV Lock

FV Lock is not currently supported with PocketWizard radios.

Unsupported Modes

  • Mirror Up mode is not fully supported at this time – test with your specific configuration before using.
  • Exposure Delay mode (set via in-camera menu) is not currently supported.
  • Repeater/RPT mode is not currently supported.

In-Camera Flash Control

Using in-camera “Flash Control for Built In Flash” menu to control remote zones is not currently supported.

Rear-Curtain Sync and Bulb

Rear Curtain Sync and Bulb mode cannot be used together. For more information, visit our Rear Curtain Sync page.

Remote Infrared Control

ControlTL radios disable ALL infra-red/optical communication pulses used in Nikon’s native i-TTL system, and will not trigger remote flashes configured to receive these pulses. A PocketWizard radio is required for each remote flash you want to trigger.


Do you need personalized customer service?
If you need more information or personalized assistance, please contact us via our Inquiries Page.