MiniTT1 and FlexTT5 Specifications
From PocketWizard Wiki
Next recommended reading: FCC Notice |
See Channels for more information about Standard and ControlTL frequencies and channels.
Specifications
TTL Compatibility | Nikon i-TTL Canon E-TTL II |
Frequency | 340.00 - 354.00 US FCC/IC 433.42 - 434.42 MHz - CE |
Channels | 52 Channels over 26 Frequencies - US FCC/IC 35 Channels over 5 Frequencies - CE |
Antenna | MiniTT1 - internal FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing |
Transmit Output Power | Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
Range Performance | Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. |
Mounting | Hot Shoe, 1/4-20, lanyard, velcro |
Maximum Shooting Rate | TTL Mode: within 1 FPS of camera's maximum frames per second (FPS) Basic Trigger Mode: Camera Max FPS dependent on flash power settings |
Power/Channel Switch | OFF - C.2 - C.1 |
Zone Select Switch | A-B-C (matches Canon/Nikon zones) |
Status Indicator | LED: Green, Amber, Red status indications |
Power | Receives power from attached flash |
Camera / P1 Port | 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous Tip = Trigger Ring = Pre-Trigger Sleeve = Ground |
Flash / P2 Port | 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
Minimum Receive Contact Time | Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us |
Voltage Present | 3.3 VDC (all pins) - safe for all cameras |
Voltage protection | Hot Shoe - Up to 50V P2 Port - Up to 200V |
Operating Temperature | Above -15° C (5° F) and below 50° C (120° F). |
Storage Temperature (without battery) | Above -30 C (-22 F) and below 85 C (185 F) |
Construction | High impact plastic, captive battery door Hot Shoe made of glass reinforced resin ROHS Compliant |
Power | MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB |
Battery Life | MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits FlexTT5 - 60 + Hours |
Dimensions | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
Weight | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries |
Included in the box | MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide |