MiniTT1 and FlexTT5 Specifications

From PocketWizard Wiki
Revision as of 05:54, 30 August 2011 by Zachary (Talk | contribs)

Jump to: navigation, search
Next recommended reading: FCC Notice

See Channels for more information about Standard and ControlTL frequencies and channels.

Specifications

TTL Compatibility Nikon i-TTL
Canon E-TTL II
Frequency 340.00 - 354.00 US FCC/IC
433.42 - 434.42 MHz - CE
Channels 52 Channels over 26 Frequencies - US FCC/IC
35 Channels over 5 Frequencies - CE
Antenna MiniTT1 - internal
FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing
Transmit Output Power Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
Mounting Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate TTL Mode: within 1 FPS of camera's maximum frames per second (FPS)
Basic Trigger Mode: Camera Max FPS
dependent on flash power settings
Power/Channel Switch OFF - C.2 - C.1
Zone Select Switch A-B-C (matches Canon/Nikon zones)
Status Indicator LED: Green, Amber, Red status indications
Power Receives power from attached flash
Camera / P1 Port 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present 3.3 VDC (all pins) - safe for all cameras
Voltage protection Hot Shoe - Up to 50V
P2 Port - Up to 200V
Operating Temperature Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature (without battery) Above -30 C (-22 F) and below 85 C (185 F)
Construction High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
ROHS Compliant
Power MiniTT1 - 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
FlexTT6 - Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits
FlexTT5 - 60 + Hours
Dimensions MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery
FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery
FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide
FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide