Difference between revisions of "MiniTT1 and FlexTT5 Specifications"
From PocketWizard Wiki
(→Specifications) |
|||
| Line 10: | Line 10: | ||
|- | |- | ||
|'''Frequency''' | |'''Frequency''' | ||
| − | |US FCC/IC 340.00 - 354. | + | |US FCC/IC ''340.00 - 354.00MHz'' <br>CE - ''433.42 - 434.42 MHz'' |
|- | |- | ||
| − | |'''Channels''' | + | |'''[[Channels]]''' |
| − | |US FCC/IC - 52 Channels over 26 Frequencies<br> CE 35 Channels over 5 Frequencies | + | |US FCC/IC - ''52 Channels over 26 Frequencies''<br> CE - ''35 Channels over 5 Frequencies'' |
|- | |- | ||
|'''Antenna''' | |'''Antenna''' | ||
| Line 21: | Line 21: | ||
|Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) | |Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) | ||
|- | |- | ||
| − | |'''Range Performance''' | + | |'''[[Long_Range_Performance|Range Performance]]''' |
| − | |Up to 800 feet (10 to 240 meters) for | + | |Up to 800 feet (10 to 240 meters) for ControlTL triggering depending on flash used, antenna orientation and other variables. <br> Up to 1200 feet (10 to 365 meters) for [[Misc_Tab#Basic_Trigger| basic triggering]] depending on flash used, antenna orientation and other variables. |
|- | |- | ||
|'''Mounting''' | |'''Mounting''' | ||
| − | |Hot Shoe, 1/4-20, lanyard, velcro | + | |Hot Shoe, 1/4-20 thread mount, lanyard, velcro |
|- | |- | ||
|'''Maximum Shooting Rate''' | |'''Maximum Shooting Rate''' | ||
| Line 39: | Line 39: | ||
|LED: Green, Amber, Red status indications | |LED: Green, Amber, Red status indications | ||
|- | |- | ||
| − | |'''Power''' | + | |'''[[Batteries|Power]]''' |
|MiniTT1: 3 V Lithium battery, CR2450 (included) | |MiniTT1: 3 V Lithium battery, CR2450 (included) | ||
FlexTT5: Two (2) AA (IEC:LR6) batteries; Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed | FlexTT5: Two (2) AA (IEC:LR6) batteries; Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed | ||
| Line 67: | Line 67: | ||
|High impact plastic, captive battery door <br>Hot Shoe made of glass reinforced resin <br>''RoHS Compliant'' | |High impact plastic, captive battery door <br>Hot Shoe made of glass reinforced resin <br>''RoHS Compliant'' | ||
|- | |- | ||
| − | |'''Battery Life''' | + | |'''[[Batteries|Battery Life]]''' |
|Canon MiniTT1 - Hundreds of hours of camera "awake time" depending on shooting habits<br> | |Canon MiniTT1 - Hundreds of hours of camera "awake time" depending on shooting habits<br> | ||
Nikon MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits<br> | Nikon MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits<br> | ||
Revision as of 07:25, 31 August 2011
| Next recommended reading: FCC Notice |
See Channels for more information about Standard and ControlTL frequencies and channels.
Specifications
| TTL Compatibility | Nikon i-TTL OR Canon E-TTL II |
| Frequency | US FCC/IC 340.00 - 354.00MHz CE - 433.42 - 434.42 MHz |
| Channels | US FCC/IC - 52 Channels over 26 Frequencies CE - 35 Channels over 5 Frequencies |
| Antenna | MiniTT1 - internal FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing |
| Transmit Output Power | Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
| Range Performance | Up to 800 feet (10 to 240 meters) for ControlTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. |
| Mounting | Hot Shoe, 1/4-20 thread mount, lanyard, velcro |
| Maximum Shooting Rate | TTL Mode: within 1 FPS of camera's maximum frames per second (FPS) Basic Trigger Mode: Camera Max FPS dependent on flash power settings |
| Power/Channel Switch | OFF - C.2 - C.1 |
| Zone Select Switch | A-B-C (matches Canon/Nikon zones) |
| Status Indicator | LED: Green, Amber, Red status indications |
| Power | MiniTT1: 3 V Lithium battery, CR2450 (included)
FlexTT5: Two (2) AA (IEC:LR6) batteries; Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed |
| Camera / P1 Port | 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous Tip = Trigger Ring = Pre-Trigger Sleeve = Ground |
| Flash / P2 Port | 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
| Minimum Receive Contact Time | Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us |
| Voltage Present | 3.3 VDC (all pins) - safe for all cameras |
| Voltage protection | Hot Shoe - Up to 50V P2 Port - Up to 200V |
| Operating Temperature | Above -15° C (5° F) and below 50° C (120° F). |
| Storage Temperature (without battery) | Above -30 C (-22 F) and below 85 C (185 F) |
| Construction | High impact plastic, captive battery door Hot Shoe made of glass reinforced resin RoHS Compliant |
| Battery Life | Canon MiniTT1 - Hundreds of hours of camera "awake time" depending on shooting habits Nikon MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits |
| Dimensions | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
| Weight | MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries |
| Included in the box | MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide |
