Difference between revisions of "Nikon D610"

Revision as of 14:26, 4 August 2014

Review this page for information about the Nikon D610 and its performance with PocketWizard radios.

D610 Specific Operational Considerations

The following operational considerations apply only to the D610.

Flash Sync Speed - Custom Camera Setting

When using the D600 and ControlTL radios the camera's "Flash Sync Speed" setting must be set to "1/200 s (Auto FP)." This setting can be found in the "Bracketing/Flash" Custom Settings menu. This is different from other Nikon cameras, which require a Flash Sync Speed setting of 1/250 s (Auto FP).

Camera Battery Power

This camera will only perform as expected with the ControlTL system if the camera’s battery is 60% or greater. Always make sure the camera’s battery is fully charged before use.

For best performance with a battery grip, use the setting "Use Camera Battery First," d13 in the camera's Custom Setting Menu.

Nikon Special Notes

The following special notes apply to all Nikon cameras.

FV Lock

FV Lock is not currently supported with PocketWizard radios.

Unsupported Modes

• Mirror Up mode is not fully supported at this time – test with your specific configuration before using.
• Exposure Delay mode (set via in-camera menu) is not currently supported.
• Repeater/RPT mode is not currently supported.

In-Camera Flash Control

Using in-camera “Flash Control for Built In Flash” menu to control remote zones is not currently supported.

Rear-Curtain Sync and Bulb

Rear Curtain Sync and Bulb mode cannot be used together. For more information, visit our Rear Curtain Sync page.

Remote Infrared Control

ControlTL radios disable ALL infra-red/optical communication pulses used in Nikon’s native i-TTL system, and will not trigger remote flashes configured to receive these pulses. A PocketWizard radio is required for each remote flash you want to trigger.