Difference between revisions of "Canon Compatibility"

From PocketWizard Wiki
Jump to: navigation, search
(→‎Current Generation)
(→‎Speedlite Compatibility: added TT6 to most sections)
 
(82 intermediate revisions by 7 users not shown)
Line 1: Line 1:
−
This section contains compatibility information for the Canon [[MiniTT1 and FlexTT5]] ControlTL radios.{{recommended reading|PocketWizard Utility|}}
+
{| class ="wikitable" style="background-color: #ffffcc;"
 +
|'''IMPORTANT NOTE:''' This section contains compatibility information for the Canon [[MiniTT1 and FlexTT5]] ControlTL radios. For TTL, HSS, and/or power control with newer Canon bodies, starting with the 1Dx Mark II and including mirrorless cameras, you may need to use a FlexTT6 or Raven by Fusion TLC as a transmitter. Please check the compatibility table below for details.
 +
|}
  
 +
===Current Firmware===
  
−
===Future Compatiblity===
+
The latest Legacy firmware version available for the Canon MiniTT1 and FlexTT5 is {{Template:Latestcanon}}.
  
−
The following is the prioritized list of planned BETA firmware releases and production releases for compatibility with newly released photography gear from Sekonic, Nikon and Canon. Prioritization is based on when gear was received, complexity of reverse engineering and majority of users:
+
MiniTT1s and FlexTT5s can be updated to this version via the [[PocketWizard Utility]].
  
−
#[http://www.sekonic.com/Portals/0/Products/Sekonic_RT-32CTL_PR.pdf Sekonic RT-32CTL] - Compatibility now available with [http://www.pocketwizard.com/support/downloads Canon firmware update 6.150].
+
== Camera Compatibility ==
−
#New Nikon Gear: - Compatibility now available with [http://www.pocketwizard.com/support/downloads Nikon beta firmware update 3.150].
+
−
#*Nikon SB-910
+
The MiniTT1 and FlexTT5 for Canon are compatible with these Canon digital cameras capable of using Canon's latest E-TTL II protocol. If you have a newer camera body not listed here, you may need to use a [[FlexTT6 Compatibility|FlexTT6]] or a [https://pocketwizard.com/products-radios-raven/ Raven by Fusion TLC] as a transmitter. Please see the note below for details.
−
#*Nikon D4
+
−
#*Nikon D800
+
−
#*Nikon D800E
+
−
#New Canon Gear:- Compatibility now available for 600EX-RT and ST-E3-RT with [http://www.pocketwizard.com/support/downloads Canon firmware update 6.150]
+
−
#*Canon 600EX-RT
+
−
#*Canon ST-E3-RT
+
−
#New Canon Gear:- Compatibility now available for 5D Mark III with [http://www.pocketwizard.com/support/downloads/beta Canon beta firmware 6.153]
+
−
#*Canon 5D Mark III
+
−
#New Canon Gear:
+
−
#*Canon 1D X
+
−
#*Canon T4i
+
  
−
This page will be updated when beta firmware is released and we will also post on the [http://www.facebook.com/pocketwizards/ PocketWizard Facebook page]. 
+
{{CanonCameras}}
  
 +
{| class ="wikitable" style="background-color: #ffffcc;"
 +
|'''Note:''' Some newer DSLR camera bodies, starting with the 5D Mark IV and 1Dx Mark II are not TTL compatible with the MiniTT1 or FlexTT5 as a transmitter. You may need to use a FlexTT6 on your camera instead. Please see the [[FlexTT6 Compatibility|FlexTT6]] page for details.
  
−
MiniTT1 and FlexTT5 for Canon firmware 6.150 with Sekonic RT-32CTL and Canon 600EX-RT and ST-E3-RT support now available [http://www.pocketwizard.com/support/downloads here].
+
The Canon mirrorless cameras are not currently TTL compatible with the FlexTT5, FlexTT6, or MiniTT1. You may need to use a [https://pocketwizard.com/products-radios-raven/ Raven by Fusion TLC] on your camera as a transmitter with FlexTT5 or FlexTT6 radios as receivers for TTL.  
  
−
MiniTT1 and FlexTT5 for Canon beta firmware 6.153 includes compatibility with the 5D Mark III and is available [http://www.pocketwizard.com/support/downloads/beta here].  Please note beta firmware 6.153 does not include compatibility with the 1D X or the Rebel T4i.  Support for these cameras will be a separate beta and is the next priority. 
+
Any Canon camera that is not TTL compatible in TTL mode (except models without a center contact pin) are compatible with the current Legacy firmware in [[Misc Tab#Basic Trigger|Basic Trigger Mode]] for manual triggering up to X-sync.
−
 
+
−
Detailed Nikon Compatibility is available [[Nikon_Compatibility|here]].
+
−
 
+
−
== Camera Compatibility ==
+
−
+
−
The MiniTT1 and FlexTT5 for Canon are compatible with these modern Canon digital cameras capable of using Canon's latest E-TTL II protocol:
+
−
 
+
−
<div align="center">
+
−
{| border=1 style="text-align:center" class="wikitable" cellpadding="10" cellspacing="10"
+
−
|1Ds Mark III
+
−
|1D Mark IV
+
−
|7D *
+
−
|60D
+
−
|Rebel T3i / 600D
+
−
|-
+
−
|1Ds Mark II
+
−
|1D Mark III
+
−
|5D Mark II
+
−
|50D
+
−
|Rebel T3 / 1100D
+
−
|-
+
−
|
+
−
|1D Mark II N
+
−
|5D
+
−
|40D
+
−
|Rebel T2i/550D
+
−
|-
+
−
|
+
−
|1D Mark II
+
−
|
+
−
|30D
+
−
|Rebel T1i/500D
+
−
|-
+
−
|
+
−
|
+
−
|
+
−
|20D
+
−
|Rebel XSi/450D
+
−
|-
+
−
|
+
−
|
+
−
|
+
−
|
+
−
|Rebel XTi/400D
+
−
|-
+
−
|
+
−
|
+
−
|
+
−
|
+
−
|Rebel XT/350D
+
−
|-
+
−
|
+
−
|
+
−
|
+
−
|
+
−
|Rebel XS/1000D
+
 
|}
 
|}
−
</div>
+
 
 +
All PocketWizard radios can be used with most of the Canon cameras. However, the Canon T7i and SL3 lack the main center contact pin on the hot shoe. PocketWizard radios, like most transmitters, rely on this signal from the camera. With these cameras, a transmitting PocketWizard will not be able to send out a trigger to a remote PocketWizard for flash sync. However, you can use a remote camera cable connected to a receiving PocketWizard and the camera to remotely trigger the camera from a transmitting PocketWizard radio.
  
 
For optimal performance, it is highly recommended to specify your camera model in the [[Misc Tab#Camera Model (Canon Only)|Misc Tab]] of the [[PocketWizard Utility]] for your transmitting radio.
 
For optimal performance, it is highly recommended to specify your camera model in the [[Misc Tab#Camera Model (Canon Only)|Misc Tab]] of the [[PocketWizard Utility]] for your transmitting radio.
  
−
* The new 7D 2.0 firmware is fully compatible with our latest ControlTL 6.150 firmware (or higher) for Canon
 
  
 +
===Non-Compatible Cameras===
  
−
[[Misc Tab|BASIC TRIGGER MODE]]: Almost all cameras and flashes are compatible with the MiniTT1 and FlexTT5 when the radios are configured for Basic Trigger Mode.  Basic Trigger Mode disables all flash power control and TTL functions of the radios.
+
{{Potentialcanoncompatibility}}
  
−
Canon's PowerShot cameras, such as the G9, G10, G11, G12 and earlier models, are not supported with our radios. Although these cameras can use many of the same flashes as modern Canon DSLRs, they use a very different implementation of Canon's ETTL II protocol.
+
[[Misc Tab|BASIC TRIGGER MODE]]: Almost all cameras and flashes are compatible with the MiniTT1 and FlexTT5 when the radios are configured for Basic Trigger Mode.  Basic Trigger Mode disables all flash power control and TTL functions of the radios. 
 +
 
 +
Canon's PowerShot cameras, such as the G9, G10, G11, G12 and earlier models, are not supported with our radios. Although these cameras can use many of the same flashes as modern Canon DSLRs, they use a very different implementation of Canon's ETTL protocol.
  
 
== Speedlite Compatibility ==
 
== Speedlite Compatibility ==
  
  
−
'''Special Note:'''  Canon Speedlite models 580EX and 580EX II, and especially the older 430EX (not the newer 430EX II), emit RF interference that can substantially reduce the effective operating range of many radio slaves, including the FlexTT5 when used as a receiver. For these model flashes, please utilize the mounting suggestions on [http://www.pocketwizard.com/inspirations/technology/range/ PocketWizard.com]
+
'''Special Note:'''  Canon Speedlite models 580EX, 580EX II, 430EX, and 430EX III-RT (but not the 430EX II), emit RF interference that can substantially reduce the effective operating range of many radio slaves, including the FlexTT5 and FlexTT6 when used as a receiver. For these model flashes, please utilize the mounting suggestions on [http://www.pocketwizard.com/inspirations/technology/range/ PocketWizard.com]
  
  
−
The MiniTT1/FlexTT5 are E-TTL II compatible with these Canon flashes:
+
The FlexTT5 and FlexTT6 radios are E-TTL II compatible with these Canon flashes:
  
 
=== Current Generation ===
 
=== Current Generation ===
−
;600EX-RT
+
;600EX-RTII
−
:Supported Modes:
+
*Supported Modes:
 +
**Master E-TTL
 +
**Master Manual
 +
**Remote E-TTL
 +
**Remote Manual
  
 +
*Unsupported Modes:
 +
**Multi (stroboscopic) is not supported.
 +
**Group mode is not supported.
 +
**"ALL" selection is not supported, but Ratios are available in supported Master modes.
 +
 +
;600EX-RT
 +
*Supported Modes:
 
**Master E-TTL
 
**Master E-TTL
 
**Master Manual
 
**Master Manual
Line 112: Line 64:
 
**Remote Manual
 
**Remote Manual
  
−
:Unsupported Modes:
+
*Unsupported Modes:
 +
**Multi (stroboscopic) is not supported.
 +
**Group mode is not supported.
 +
**"ALL" selection is not supported, but Ratios are available in supported Master modes.
 +
 
 +
;430EX III-RT
 +
 
 +
:Range may be limited due to RF interference from flash when connected to a remote FlexTT5 or FlexTT6.  See [[Long Range Performance]].
 +
 
 +
*Supported Modes
 +
**Master E-TTL
 +
**Master Manual
 +
**Remote E-TTL
 +
**Remote Manual
  
 +
*Unsupported Modes
 
**Multi (stroboscopic) is not supported.
 
**Multi (stroboscopic) is not supported.
 
**Group mode is not supported.
 
**Group mode is not supported.
Line 120: Line 86:
 
;580EX II
 
;580EX II
 
:Full feature compatibility.
 
:Full feature compatibility.
−
:Range limited due to RF interference from flash only when connected to a remote FlexTT5.  See [[Range Extending Solutions]].
+
:Range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6.  See [[Long Range Performance]].
 
:Not range limited when used on a transmitting radio.
 
:Not range limited when used on a transmitting radio.
  
Line 135: Line 101:
 
;270EX II
 
;270EX II
 
:Can be used on the MiniTT1 or FlexTT5 (Transmit or Receive) in ETTL mode.
 
:Can be used on the MiniTT1 or FlexTT5 (Transmit or Receive) in ETTL mode.
−
:Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5.  See [[Range Extending Solutions]].
+
:Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5.  See [[Long Range Performance]].
 
:To use this flash on a ControlTL radio mounted on a camera at HSS shutter speeds, you first need to enable HSS mode in the flash. Mount the 270EX directly on a camera (no radio in-between) and enable HSS mode via the camera’s menus. Once that mode is enabled, the flash will work properly at HSS shutter speeds when mounted on a MiniTT1 or FlexTT5 when used as a transmitter. HSS operation is automatic (no need to set it) when used on a FlexTT5 as a receiver.
 
:To use this flash on a ControlTL radio mounted on a camera at HSS shutter speeds, you first need to enable HSS mode in the flash. Mount the 270EX directly on a camera (no radio in-between) and enable HSS mode via the camera’s menus. Once that mode is enabled, the flash will work properly at HSS shutter speeds when mounted on a MiniTT1 or FlexTT5 when used as a transmitter. HSS operation is automatic (no need to set it) when used on a FlexTT5 as a receiver.
 
:This flash may have occasional exposure issues when used on a MiniTT1 or FlexTT5 mounted directly on certain cameras like the 5D Mark II, 40D, 20D, and possibly others.
 
:This flash may have occasional exposure issues when used on a MiniTT1 or FlexTT5 mounted directly on certain cameras like the 5D Mark II, 40D, 20D, and possibly others.
Line 141: Line 107:
  
 
;320EX
 
;320EX
−
:Full Feature Compatiblity
+
:Full Feature Compatibility
 
:Excellent range performance with this flash.  
 
:Excellent range performance with this flash.  
 
::''Some RF interference present when LED lamp is on.''
 
::''Some RF interference present when LED lamp is on.''
Line 149: Line 115:
 
;580EX
 
;580EX
 
:Full feature compatibility.
 
:Full feature compatibility.
−
:Range limited due to RF interference from flash only when connected to a remote FlexTT5.  See [[Range Extending Solutions]].
+
:Range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6.  See [[Long Range Performance]].
 
:Not range limited when used on a transmitting radio.
 
:Not range limited when used on a transmitting radio.
  
 
;430EX:       
 
;430EX:       
 
:Full feature compatibility.
 
:Full feature compatibility.
−
:Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5.  See [[Range Extending Solutions]].
+
:Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6.  See [[Long Range Performance]].
 
:Not range limited when used on a transmitting radio.
 
:Not range limited when used on a transmitting radio.
  
Line 165: Line 131:
  
 
;220EX
 
;220EX
−
:Can be used on FlexTT5 as a receiver in E-TTL mode only.
+
:Can be used on FlexTT5 or FlexTT6 as a receiver in E-TTL mode only.
−
:Cannot be used on MiniTT1 or FlexTT5 as a transmitter.
+
:Cannot be used on MiniTT1, FlexTT5, or FlexTT6 as a transmitter.
 
:This flash performs better if an OC-E3 cable is used.
 
:This flash performs better if an OC-E3 cable is used.
  
  
−
[[Misc Tab|BASIC TRIGGER MODE]]: Almost all cameras and flashes are compatible with the MiniTT1 and FlexTT5 when the radios are configured for Basic Trigger Mode.  Basic Trigger Mode disables all flash power control and TTL functions of the radios.
+
[[Misc Tab|BASIC TRIGGER MODE]]: Almost all cameras and flashes are compatible with the MiniTT1, FlexTT5, or FlexTT6 when the radios are configured for Basic Trigger Mode using Legacy firmware.  Basic Trigger Mode disables all flash power control and TTL functions of the radios.
  
 
=== 3rd Party Speedlite Compatible Flashes ===
 
=== 3rd Party Speedlite Compatible Flashes ===
Line 187: Line 153:
 
==== Nissin ====
 
==== Nissin ====
  
−
;Di866
+
The Nissin Di622, Di622 Mark II, Di866, and Di866 Mark II for Canon are currently compatible with ControlTL radios (such as the MiniTT1 and FlexTT5) with certain limitations.  Please see our [[Nissin Compatibility|Nissin Compatibility page]] for full details.
−
;Di622
+
−
 
+
−
A control was added to the [[Misc Tab]] in the [[PocketWizard Utility]] called “Top Shoe Detection Mode.” To use a Nissin Di866 or Di622 for Canon this control must be set for “Nissin Flash.” Most features of these flashes are supported.
+
−
 
+
−
These flashes may only be used on a remote FlexTT5 used as a receiver.  They are not compatible as on-camera MASTER flashes.
+
−
 
+
−
 
+
−
''Note: The Di866 Mark II and Di622 Mark II are currently not compatible.''
+
−
 
+
  
 
== Operational Notes ==
 
== Operational Notes ==
  
−
=== 30D as remote camera ===
+
===ControlTL Remote Camera===
−
 
+
−
When remote triggering the 30D camera remotely, it must be set to “Auto Power Off – Disable” otherwise once camera sleeps, trigger will not work.
+
−
 
+
−
 
+
−
=== 5D 1/8000th in Automatic Metering modes ===
+
−
 
+
−
With some 5D's, the camera's shutter speed can get stuck at 1/8000th or f/22 when in P, Av or Tv mode, if a Speedlite is used in the top shoe of an on-camera PocketWizard. There is a known bug in the camera's firmware where the camera exhibits the same symptoms, but only with a Speedlite in manual mode. This can occur with or without PocketWizards.
+
−
 
+
−
=== Remote camera triggering delays ===
+
−
 
+
−
With the default settings, remote cameras will be limited to Single Shot mode and there will be a delay between subsequent triggers. You can avoid this delay completely if you set the FlexTT5 attached to the remote camera to Basic Trigger Mode. A PocketWizard in this mode acts as a simple trigger. Advanced features like TTL flash and High Speed Sync won't be available.
+
−
 
+
  
−
=== Rear Curtain Sync not supported in Bulb Mode ===
+
Using the default settings, remote cameras with a receiving FlexTT5 will be limited to Single Shot mode and there will be a delay between subsequent triggers. To learn more about remote camera triggering with ControlTL radios, visit our [[Remote Camera Triggering]] page.
  
−
Rear Curtain Sync and Bulb mode cannot be used together, because Bulb exposures are terminated manually by the photographer. With rear curtain sync, the radio sends a signal to the flash to fire just before the shutter closes. In Bulb mode, the exposure timing is infinitely variable, and the radios cannot receive commands indicating that an exposure is about to end.
+
Mirror Lockup mode is not compatible with ControlTL settings, but may work if the radios are set to [[Misc_Tab#Basic_Trigger|Basic Trigger Mode]].
  
−
=== 20D Remote Wireless Manual Mode over-exposures ===
+
===Camera-Specific Operational Considerations===
  
−
If you use Remote Wireless Manual controls with a 580EX II in the top shoe of a Mini or Flex on a 20D, about 20% of the exposures result in overexposure with remote Speedlites.
+
For more information about operational considerations that may affect your camera specifically, choose the model below:
  
 +
{{CanonCameras}}
  
−
=== Modes Not Supported ===
+
<br />
  
−
*Speedlite controls set via the in-camera menus, like Flash Exposure Compensation and ratio settings, are not currently supported.
+
{{CustomerService}}
−
*FEB (Flash Exposure Bracketing) and Stroboscopic Flash are not currently supported
+

Latest revision as of 07:18, 6 April 2022

IMPORTANT NOTE: This section contains compatibility information for the Canon MiniTT1 and FlexTT5 ControlTL radios. For TTL, HSS, and/or power control with newer Canon bodies, starting with the 1Dx Mark II and including mirrorless cameras, you may need to use a FlexTT6 or Raven by Fusion TLC as a transmitter. Please check the compatibility table below for details.

Current Firmware

The latest Legacy firmware version available for the Canon MiniTT1 and FlexTT5 is 6.905.

MiniTT1s and FlexTT5s can be updated to this version via the PocketWizard Utility.

Camera Compatibility

The MiniTT1 and FlexTT5 for Canon are compatible with these Canon digital cameras capable of using Canon's latest E-TTL II protocol. If you have a newer camera body not listed here, you may need to use a FlexTT6 or a Raven by Fusion TLC as a transmitter. Please see the note below for details.

Currently Supported Cameras
Canon 1D X Canon 7D Mark II Canon 70D Canon Rebel T5i (700D)
Canon 1D Mark IV Canon 7D Canon 60D Canon Rebel T5 (1200D)
Canon 1Ds Mark III Canon 6D Canon 50D Canon Rebel SL1 (100D)
Canon 1D Mark III Canon 5Ds/R Canon 40D Canon Rebel T4i (650D)
Canon 1Ds Mark II Canon 5D Mark III Canon 30D Canon Rebel T3i (600D)
Canon 1D Mark II N Canon 5D Mark II Canon 20D Canon Rebel T3 (1100D)
Canon 1D Mark II Canon 5D Canon Rebel T2i (550D)
Canon Rebel T1i (500D)
Canon Rebel XSi (450D)
Canon Rebel XTi (400D)
Canon Rebel XT (350D)
Canon Rebel XS (1000D)
Note: Some newer DSLR camera bodies, starting with the 5D Mark IV and 1Dx Mark II are not TTL compatible with the MiniTT1 or FlexTT5 as a transmitter. You may need to use a FlexTT6 on your camera instead. Please see the FlexTT6 page for details.

The Canon mirrorless cameras are not currently TTL compatible with the FlexTT5, FlexTT6, or MiniTT1. You may need to use a Raven by Fusion TLC on your camera as a transmitter with FlexTT5 or FlexTT6 radios as receivers for TTL.

Any Canon camera that is not TTL compatible in TTL mode (except models without a center contact pin) are compatible with the current Legacy firmware in Basic Trigger Mode for manual triggering up to X-sync.

All PocketWizard radios can be used with most of the Canon cameras. However, the Canon T7i and SL3 lack the main center contact pin on the hot shoe. PocketWizard radios, like most transmitters, rely on this signal from the camera. With these cameras, a transmitting PocketWizard will not be able to send out a trigger to a remote PocketWizard for flash sync. However, you can use a remote camera cable connected to a receiving PocketWizard and the camera to remotely trigger the camera from a transmitting PocketWizard radio.

For optimal performance, it is highly recommended to specify your camera model in the Misc Tab of the PocketWizard Utility for your transmitting radio.


Non-Compatible Cameras

Incompatible Pre-2004 Cameras
1D (Mark I) 1Ds (Mark I) D60
10D D30 Rebel (300D)
DCS 3 DCS 1 D2000 / D6000

BASIC TRIGGER MODE: Almost all cameras and flashes are compatible with the MiniTT1 and FlexTT5 when the radios are configured for Basic Trigger Mode. Basic Trigger Mode disables all flash power control and TTL functions of the radios.

Canon's PowerShot cameras, such as the G9, G10, G11, G12 and earlier models, are not supported with our radios. Although these cameras can use many of the same flashes as modern Canon DSLRs, they use a very different implementation of Canon's ETTL protocol.

Speedlite Compatibility

Special Note: Canon Speedlite models 580EX, 580EX II, 430EX, and 430EX III-RT (but not the 430EX II), emit RF interference that can substantially reduce the effective operating range of many radio slaves, including the FlexTT5 and FlexTT6 when used as a receiver. For these model flashes, please utilize the mounting suggestions on PocketWizard.com


The FlexTT5 and FlexTT6 radios are E-TTL II compatible with these Canon flashes:

Current Generation

600EX-RTII
  • Supported Modes:
    • Master E-TTL
    • Master Manual
    • Remote E-TTL
    • Remote Manual
  • Unsupported Modes:
    • Multi (stroboscopic) is not supported.
    • Group mode is not supported.
    • "ALL" selection is not supported, but Ratios are available in supported Master modes.
600EX-RT
  • Supported Modes:
    • Master E-TTL
    • Master Manual
    • Remote E-TTL
    • Remote Manual
  • Unsupported Modes:
    • Multi (stroboscopic) is not supported.
    • Group mode is not supported.
    • "ALL" selection is not supported, but Ratios are available in supported Master modes.
430EX III-RT
Range may be limited due to RF interference from flash when connected to a remote FlexTT5 or FlexTT6. See Long Range Performance.
  • Supported Modes
    • Master E-TTL
    • Master Manual
    • Remote E-TTL
    • Remote Manual
  • Unsupported Modes
    • Multi (stroboscopic) is not supported.
    • Group mode is not supported.
    • "ALL" selection is not supported, but Ratios are available in supported Master modes.
580EX II
Full feature compatibility.
Range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6. See Long Range Performance.
Not range limited when used on a transmitting radio.
430EX II
Full feature compatibility.
Excellent range performance with this flash.
270EX
Can be used on the MiniTT1 or FlexTT5 (Transmit or Receive) in ETTL mode.
Range slightly limited due to some RF interference from Speedlite only when connected to a remote FlexTT5.
To use this flash on a ControlTL radio mounted on a camera at HSS shutter speeds, you first need to enable HSS mode in the flash. Mount the 270EX directly on a camera (no radio in-between) and enable HSS mode via the camera’s menus. Once that mode is enabled, the flash will work properly at HSS shutter speeds when mounted on a MiniTT1 or FlexTT5 when used as a transmitter. HSS operation is automatic (no need to set it) when used on a FlexTT5 as a receiver.
This flash may have occasional exposure issues when used on a MiniTT1 or FlexTT5 mounted directly on certain cameras like the 5D Mark II, 40D, 20D, and possibly others.
270EX II
Can be used on the MiniTT1 or FlexTT5 (Transmit or Receive) in ETTL mode.
Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5. See Long Range Performance.
To use this flash on a ControlTL radio mounted on a camera at HSS shutter speeds, you first need to enable HSS mode in the flash. Mount the 270EX directly on a camera (no radio in-between) and enable HSS mode via the camera’s menus. Once that mode is enabled, the flash will work properly at HSS shutter speeds when mounted on a MiniTT1 or FlexTT5 when used as a transmitter. HSS operation is automatic (no need to set it) when used on a FlexTT5 as a receiver.
This flash may have occasional exposure issues when used on a MiniTT1 or FlexTT5 mounted directly on certain cameras like the 5D Mark II, 40D, 20D, and possibly others.
This flash will not do AF assist, as it uses the flash itself to do AF assist on camera, rather than using IR like other flashes. As such, this different mode is not supported.
320EX
Full Feature Compatibility
Excellent range performance with this flash.
Some RF interference present when LED lamp is on.

Previous Generation

580EX
Full feature compatibility.
Range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6. See Long Range Performance.
Not range limited when used on a transmitting radio.
430EX
Full feature compatibility.
Significantly range limited due to RF interference from flash only when connected to a remote FlexTT5 or FlexTT6. See Long Range Performance.
Not range limited when used on a transmitting radio.
550EX
Full feature compatibility.
Excellent range performance with this flash.
420EX
Full feature compatibility.
220EX
Can be used on FlexTT5 or FlexTT6 as a receiver in E-TTL mode only.
Cannot be used on MiniTT1, FlexTT5, or FlexTT6 as a transmitter.
This flash performs better if an OC-E3 cable is used.


BASIC TRIGGER MODE: Almost all cameras and flashes are compatible with the MiniTT1, FlexTT5, or FlexTT6 when the radios are configured for Basic Trigger Mode using Legacy firmware. Basic Trigger Mode disables all flash power control and TTL functions of the radios.

3rd Party Speedlite Compatible Flashes

Metz

58 AF-1 (Metz firmware v5.0)
48 AF-1 (Metz firmware v4.0)


These flashes can only be used if Pre-Flash Boost is disabled on the Flash Tab in the PocketWizard Utility is disabled. Note: Pre-Flash Boost is disabled by default.

These flashes may only be used on a remote FlexTT5 used as a receiver. They are not compatible as on-camera MASTER flashes.


Nissin

The Nissin Di622, Di622 Mark II, Di866, and Di866 Mark II for Canon are currently compatible with ControlTL radios (such as the MiniTT1 and FlexTT5) with certain limitations. Please see our Nissin Compatibility page for full details.

Operational Notes

ControlTL Remote Camera

Using the default settings, remote cameras with a receiving FlexTT5 will be limited to Single Shot mode and there will be a delay between subsequent triggers. To learn more about remote camera triggering with ControlTL radios, visit our Remote Camera Triggering page.

Mirror Lockup mode is not compatible with ControlTL settings, but may work if the radios are set to Basic Trigger Mode.

Camera-Specific Operational Considerations

For more information about operational considerations that may affect your camera specifically, choose the model below:

Currently Supported Cameras
Canon 1D X Canon 7D Mark II Canon 70D Canon Rebel T5i (700D)
Canon 1D Mark IV Canon 7D Canon 60D Canon Rebel T5 (1200D)
Canon 1Ds Mark III Canon 6D Canon 50D Canon Rebel SL1 (100D)
Canon 1D Mark III Canon 5Ds/R Canon 40D Canon Rebel T4i (650D)
Canon 1Ds Mark II Canon 5D Mark III Canon 30D Canon Rebel T3i (600D)
Canon 1D Mark II N Canon 5D Mark II Canon 20D Canon Rebel T3 (1100D)
Canon 1D Mark II Canon 5D Canon Rebel T2i (550D)
Canon Rebel T1i (500D)
Canon Rebel XSi (450D)
Canon Rebel XTi (400D)
Canon Rebel XT (350D)
Canon Rebel XS (1000D)


Do you need personalized customer service?
If you need more information or personalized assistance, please contact us via our Inquiries Page.
Retrieved from "https://wiki.pocketwizard.com/index.php?title=Canon_Compatibility&oldid=4450"