View source for Current Firmware


Thank you for purchasing a PocketWizard radio! Like most modern electronics, PocketWizard radios run on sophisticated firmware that we update occasionally.

If your radios have the latest firmware, you can just start shooting - no updating required!  The radios are set to work for most situations right out of the box.

Click [Expand] for your radio to see if you can just start taking pictures or if you need to take a moment to update firmware.  

<br>
<div class="toccolours mw-collapsible mw-collapsed">
'''MiniTT1 & FlexTT5 - Canon'''
<div class="mw-collapsible-content">

{{Latestcanon}} is the latest Canon firmware.  If that's what you have, and your camera is listed here, follow the Quick Start steps below:

{{CanonCamerasAutoDetect}}

If your camera is not listed, or your radio's firmware is older than {{Latestcanon}}, or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.


<u>Quick Start:</u>

{{CanonQuick}}

</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
'''MiniTT1 & FlexTT5 - Nikon'''
<div class="mw-collapsible-content">

{{Latestnikon}} is the latest Nikon firmware.  If that's what you have, follow the Quick Start steps below.

If your radio's firmware is older than {{Latestnikon}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.


<u>Quick Start:</u>

{{NikonQuick}}

</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
'''PowerMC2'''
<div class="mw-collapsible-content">

{{Latestmc2}} is the latest PowerMC2 firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[PowerMC2]] page to learn more about your radio.

If your radio's firmware is older than {{Latestmc2}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.

</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
'''PowerST4'''
<div class="mw-collapsible-content">

{{Latestst4}} is the latest PowerST4 firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[PowerST4]] page to learn more about your radio.

If your radio's firmware is older than {{Latestst4}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.

</div>
</div>
<div class="toccolours mw-collapsible mw-collapsed">
'''Plus III'''
<div class="mw-collapsible-content">

{{LatestP3}} is the latest Plus III firmware.  If that's what you have, then you're all set!  Start shooting!  Go to the [[Plus III]] page to learn more about your radio.

If your radio's firmware is older than {{LatestP3}} or you're not sure what your firmware version is then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.

</div>
</div><div class="toccolours mw-collapsible mw-collapsed">
'''MultiMAX'''
<div class="mw-collapsible-content">

{{Latestmax}} is the latest MultiMAX firmware for USB-capable MultiMAX radios.  If that's what you have, then you're all set!  Start shooting!  Go to the [[MultiMAX]] page to learn more about your radio.

You can see the firmware version of your MultiMAX by holding down A as you power the radio on.

If your radio's firmware is older than {{Latestmax}} then you need to install the PocketWizard Utility.  Go to our [[Getting Started]] page right now.  It's easy and should only take a few minutes.

</div>
</div>